Specifications

PROGRAMMING THE CD TRANSPORT
Program: Pressing this button enters all tracks subsequently chosen
with the numeric buttons (up to a total of 20 selections) as part of a
programmed sequence.
Programming a sequence of tracks can be done either in the stop mode or in
the play mode.
To program a sequence of tracks from a Compact Disc while in the stop
mode, first press the program button. The program indicator will illuminate in
the display window. Next, press the numeric buttons of the tracks you would
like to program in the sequence desired. The number of each selected track
will be indicated under the track indicator, the location of that track within the
program (the playing order) of the tracks selected will be indicated in the area
where index is usually identified, and the total program playback time
of the sequence will be updated as each track is programmed.
To program a sequence of tracks from a compact disc while in the play
mode, the procedure is the same. The only difference is that the total
program’s playback time will not be displayed.
A program will continue to be held in memory, even after that program has
been completely played.
When programmed playback is ended by pressing the stop button, the
program will continue to be held in memory. However, if the stop button
is pressed a second time, the programmed contents will be erased
from memory.
To exit the Program mode, press the program button again.
Single: To play a single track, press the single button (the single indicator
will light in the display window), then press the numeric button(s) which cor-
respond(s) to the track you would like to play. The transport will search for the
selected track, and playback will start from the beginning of that track. At the
conclusion of the track, the transport will stop.
To repeat a single track, press the single button (the single indicator will
illuminate in the display window), then press the repeat indicator (the repeat
button will illuminate in the display window), and then press the numeric
button(s) which correspond(s) to the track you would like to repeat. Playback
of the track selected will begin immediately.
Delete: This button is the opposite of normal programming. Pressing this
button while a program is being entered erases the entire entered program.
To play an entire disc, except for specific tracks that you do not want to hear,
press this button and then the numeric buttons corresponding the tracks you
would like to delete (up to 20 selections).
Wadia 861 COMPACT DISC PLAYER
15