User manual

MagicTouch MT200 VW10 Suitable for installing in the following vehicles
9
The following information contains vehicle-specific installation instructions
for MagicTouch MT200. Refer to the installation and operating manual for any
further information.
1 Suitable for installing in the following vehicles
The MagicTouch MT200 VW10 radio remote control (item no. 9101300033) can be
used in the following vehicle types:
z Skoda Fabia 00 – 06
z Skoda Octavia SLXi 96 – 00
z Skoda Octavia GLXi 96 – 00
z VW Passat 97 – 00
z VW Polo 02 – 05
2 Installing and connecting the MT200
I
NOTE
Use a red piercing connector for cables with a cross-section of max. 1 mm².
Use a blue piercing connector for cables with a cross-section of between
1.5 to 2.5 mm².
➤ Undo the strap on the negative terminal of the vehicle battery.
2.1 Power supply
Skoda Octavia and VW Passat
➤ Connect the following cables of the radio remote control as follows:
– Connect the red cable to the “+30” screw terminal (under the dashboard,
fig. 1 1, page 2)
– Connect the orange cable to the “75X” screw terminal (under the dashboard,
fig. 1 1, page 2)
– Connect the black cable to an available earth point
_MT200_VW10.book Seite 9 Montag, 19. April 2010 7:32 19