User manual

MagicSafe MS660 Connecting the power to MagicSafe
77
The convenience function allows you to e. g.:
z Close windows
z Close the sunroof
z Switch on dipped headlights
z Unlock the boot or fuel tank lid.
z Switch on the parking heating.
I
NOTE
You will require a convenience module or an operating current
relay with recovery diode, depending on your installation, for the
convenience function.
7.5 Connecting the remaining connection cables
(fig. a, page 6)
Connecting the key holder
➤ Insert the red two-pin plug (22) of the connection cable into the red socket
(22) of the key holder.
➤ Insert the white two-pin plug (23) of the connection cable into the white
socket (23) of the key holder.
Connecting the ultrasonic module
➤ Insert the white three-pin plug (15) into the connection of the ultrasonic
module (18).
Connecting the ultrasonic senors
➤ Insert the red plug of the ultrasonic sensor cable (17) into the red connec-
tion of the ultrasonic sensor (17).
➤ Insert the white plug of the ultrasonic sensor cable (19) into the white
connection of the ultrasonic sensor (19).
_MS660.book Seite 77 Montag, 2. August 2010 8:03 20