User manual

MagicSafe MS660 Programming MagicSafe
81
9 Programming MagicSafe
9.1 Software functions
MagicSafe has various software functions which you can alter in accordance
with the following table. Values marked in bold indicate the factory setting.
No. Software function “Lock” button “Unlock” button
1 Siren sound – confirmation tone
when activating and deactivating
On Off
2 Voltage drop sensor On Off
3 Signal duration of the door lock-
ing contacts
0.7 sec. 3sec.
4 Convenience locking function
(➔ no. 19)
On Off
5 Starter circuit breaker
(➔ no. 13)
On Off
6 Automatic reactivation On Off
7 Self-activation On Off
8 Circuit time for the convenience
output
(➔ no. 18)
20 sec. 1sec.
9 Siren/vehicle horn selection
(➔ no. 13)
Siren Horn
10 Locking the central locking dur-
ing self-activation
On Off
11 Locking/unlocking with ignition On Off
12 Alarm detection for additional
sensors
Additional sensor Additional sensor
and ultrasonic sen-
sor
13 Additional relay function Starter circuit
breaker
(➔ no. 5)
Alarm output
(➔ no. 9)
15 Bonnet contact input Switch open when
the bonnet is open
(12 volts)
Switch closed
when the bonnet
is open (0 volts)
_MS660.book Seite 81 Montag, 2. August 2010 8:03 20