User manual

MagicSafe MS660 Using MagicSafe
87
10 Using MagicSafe
10.1 Function table
The following table lists all of the functions and how you can activate them.
10.2 Activating MagicSafe
To activate the alarm system manually, proceed as follows:
➤ Close the doors of the vehicle.
➤ Press the “Lock” button on the hand-held transmitter for approx. 1 sec.
✓ The hazard lights flash twice.
✓ The alarm system is activated after approx. 30 sec. The status LED
flashes in confirmation.
Function Condition
“Lock”
button
“Unlock”
button
“COMFORT”
button
Activating Ignition off ●
Deactivating Ignition off
Alarm system activated
●
Manual locking/
unlocking of the doors
from the inside
Ignition on ●
Activating without
interior monitoring
Ignition off ● ● (30 sec.)
Panic mode Ignition off
Alarm system activated
● ● (1 sec.)
Convenience output Ignition off
Alarm system activated
●
Convenience output Ignition off
Alarm system
deactivated
●
● Press the respective button
● ● (1 sec.) Press the button twice in a row within 1 sec.
● ● (30 sec.) Press the button twice in a row within 30 sec.
_MS660.book Seite 87 Montag, 2. August 2010 8:03 20