User manual

EN
Cleaning and caring for the inverter SinePower
26
Charging the device via the USB port
I
NOTE
Also observe the operating manual of the device you want to
charge via the USB port.
➤ Connect the device to the USB port (fig. 1 4, page 3) of the inverter.
9 Cleaning and caring for the inverter
A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤ Occasionally clean the device with a damp cloth.
10 Rectifying faults
I
NOTE
If you have detailed questions on the specifications of the
inverter please contact the manufacturer.
Fault Cause Remedy
No output voltage, no LED
lights up
No contact to the battery Check contact and cable.
Defective fuse (in the inverter
or the vehicle)
Have an electrician change
the fuse.
No output voltage, green
and red LED light, warning
sound, power consuming
device is swichted off
The battery voltage is less than
11 V (MSI212/MSI412) or 22 V
(MSI224/MSI424)
Charge the battery (start the
engine).
Poor contact to the battery Clean the contacts.
Input voltage too high. Check the input voltage.
reduce the input voltage.