User manual

EN
SinePower Guarantee
27
11 Guarantee
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
No output voltage, green
and red LED light, warning
sound, power consuming
device is switched on
Overheating Switch off power consuming
devices.
Let the inverter cool down
and ensure better ventilation.
Make certain that the ventila-
tion slots are not covered.
Lower the ambient tempera-
ture.
Inadequate cable connection
(cross section too small or poor
contact)
Use a cable with a larger
cross section and check
contacts.
The device switches on and
off repeatedly (up to five
times, then the inverter is
switched off)
Excessive load Switch off the device.
Reduce the load.
Switch on the device.
No output voltage, green
and red LED light
Excessive load Switch off the device.
Reduce the load.
Switch on the device.
Short circuit or electrical wiring
error
Switch off the device.
Remove short circuit.
Check electrical wiring.
Switch on the device.
The inverter switches off
when the consumer is
switched on, red Status
LED lights
Starting current too high Compare the device power
with the maximum power of
the inverter.
Fault Cause Remedy