Technical data

124 125
Pure
sine wave
voltage
Mobile energy systems
Sine wave inverter
Contents, specifications and availability are subject to change due to the technical improvement. Contents, specifications and availability are subject to change due to the technical improvement.
The advantages of the high-
performance sine wave inverters:
≥ Microprocessor-controlled electronics
for pure sine wave voltage
≥ Integrated mains priority circuit with
voltage synchronisation
≥ Overload and short-circuit protection
≥ RS232 connection for remote control
or computer, and a connection for an
external ON / OFF switch
≥ Individually adjustable clip-on mounts
≥ Exhaust air adapter
FOR THE HIGHEST DEMANDS
Where other inverters pack up, the WAECO SinePower high-performance inverters are just getting going. Pure 230-volt
AC even for highly sensitive, power-intensive appliances – no problem. Models with up to 2500 watt continuous power
will reveal an unlimited range of applications, and will keep you on the safe side in every (usage) situation. The operating
convenience of these high-quality units is tremendous, and can even be enjoyed from afar: simply connect one of the
two remote controls which are available as accessories. Both remote controls are suitable for switchboard mounting.
WAECO SinePower MSP 702 / MSP 704
≥ Continuous output: 700 watts
≥ Peak output: 1400 watt
MSP 702 // 12 volts // Ref. No.: MSP700-012 // Ref. No. UK: 9102600020
MSP 704 // 24 volts // Ref. No.: MSP700-024 // Ref. No. UK: 9102600021
WAECO SinePower MSP 1012 / MSP 1024
≥ Continuous output: 1000 watts
≥ Peak output: 2000 watt
MSP 1012 // 12 volts // Ref. No.: MSP1000-012 // Ref. No. UK: 9102600008
MSP 1024 // 24 volts // Ref. No.: MSP1000-024 // Ref. No. UK: 9102600009
WAECO SinePower MSP 1512 / MSP 1524
≥ Continuous output: 1500 watts
≥ Peak output: 3000 watt
MSP 1512 // 12 volts // Ref. No.: MSP1500-012 // Ref. No. UK: 9102600010
MSP 1524 // 24 volts // Ref. No.: MSP1500-024 // Ref. No. UK: 9102600011
WAECO SinePower MSP 2012 / MSP 2024
≥ Continuous output: 2000 watts
≥ Peak output: 4000 watt
MSP 2012 // 12 volts // Ref. No.: MSP2000-012 // Ref. No. UK: 9102600014
MSP 2024 // 24 volts // Ref. No.: MSP2000-024 // Ref. No. UK: 9102600015
WAECO SinePower MSP 2512 / MSP 2524
≥ Continuous output: 2500 watts
≥ Peak output: 5000 watts
MSP 2512 // 12 volts // Ref. No.: MSP2500-012 // Ref. No. UK: 9102600016
MSP 2524 // 24 volts // Ref. No.: MSP2500-024 // Ref. No. UK: 9102600017
+
Remote controls
WAECO SinePower Accessories
MCR-7 (for MSP 702 to MSP 2524)
≥ W x H x D: 130 x 120 x 25 mm
≥ Weight: 400 g
≥ Cable length: 7.5 m
≥ Low-voltage, over-voltage, overheat and overload
indicated by red LEDs, stand-by and power on
indicated by green LEDs
Ref. No.: MCR-7
MCR-9 (for MSP 162 to MSP 2524)
≥ W x H x D: 58 x 72 x 28 mm
≥ Weight: 40 g
≥ Cable length: 7.5 m
≥ Power on / off indicated by red LED
Ref. No.: MCR-9
WAECO SinePower
MSP 2012
3.30
All technical data, see P. 142 – 149 or www.my-caravanning.com
3.30
WAECO SinePower
MSP 702