Operation Manual

9
Federring M4
spring washer M4
Mutter M4
Nut M4
Schraube M4 x 10
Screw M4 x 10
Halter Sicherungsblock
Bracket for fuse block
Schraube M 4 x 10
Screw M4 x 10
Steuerrelais
control relay
Scheibe M4
Plain washer M4
Halter Steuerrelais
Bracket for control relay
Scheibe M4
Plain washer M4
Sicherungsblock
Fuse block
Lenksäule
Steering column
Abb. 10
Diagram 10
Sicherung und Steuerrelaismontage für
VW Golf III 2- / 4-türig und Vento
Montagevorschlag
- 2 Bohrungen Ø 4,5 mm und Ø 5,5 mm am
Befestigungsblech in der Nähe der Lenksäu-
le anbringen (siehe Abb. 10).
- Sicherungshalter und Relaisbefestigungshal-
ter befestigen. Sicherung und Relais auf den
Halterungen aufschieben.
Mutter M4
Nut M4
Nut M 4
Federring M 4
spring washer M4
Befestigungsblech
Fastening sheet
metal
Abb. 9
Diagram 9
ZV-Kabel
CL-cable
Fuse and control relay assembly for
VW Golf III 2- / 4- doors and Vento
Assembly suggestion
- Drill two Ø4.5 mm and Ø 5.5 mm holes on the fastening
sheet metal near the steering column (see diagram 10).
- Fasten the fuse bracket and the relay fastening bracket.
Slide on the fuse and the relay on the holding devices.