Operating instructions

15
GB
The scope of delivery includes the fixing bracket which is very simple to
fit. The plastic angled bracket holder is provided with 4 mm diameter
holes for wall or floor mounting. The holder can be easily screwed to the
vehicle e.g. a shelf, in a caravan or a yacht on the rear wall of the galley
(see ✎ A 3a + 3b). Use the countersunk head screws, washers and nuts
(size M 4) to secure the plastic holder, these are commercially available
items.
Attention! To avoid damage when drilling holes ensure sufficient clear-
ance for the drill break-out.
To engage push the coffee maker MC-05 into the plastic holder
(see✎ B 4a).
It can be released again by a light finger pressure
(see B 5).
Attention! When fitting the coffee maker MC-10 in the fixing bracket
ensure that the foot of the coffee maker is in the recess of the fixing
bracket (see ✎ B 4b).
In the case of wall mounting and the corresponding free space below the
coffee maker can be additionally securely screwed in place using the a
knurled screw (see ✎ B 3b A).
A storage compartment is provided beneath the coffee maker for the cable
(see ✎ B 6a + 6b).
The glass jug is secured by a clamping clip, the retention strength can be
increased by turning to the rear (see ✎ B 7a + 7b).
Fitting
872-01 GB MC05, 10.p65 28.09.2001, 09:3215