_mdc-kuehlschraenke.book Seite 1 Montag, 20.
_mdc-kuehlschraenke.book Seite 2 Montag, 20. Dezember 2004 3:15 15 D Fordern Sie weitere Informationen zur umfangreichen Produktpalette aus dem Hause WAECO. Bestellen Sie einfach unsere Kataloge kostenlos und unverbindlich unter der Internetadresse: www.waeco.de GB We will be happy to provide you with further information about WAECO products. Please order our free catalogue with no obligation to buy on our homepage: www.waeco.
_mdc-kuehlschraenke.book Seite 3 Montag, 20.
_mdc-kuehlschraenke.book Seite 4 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC-Serie 2 min. 50 mm 1 min.
_mdc-kuehlschraenke.book Seite 5 Montag, 20.
_mdc-kuehlschraenke.book Seite 21 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC Series Notes on using the operating manual Please read this operating manual carefully before starting the device. Keep it in a safe place for future reference. If the device is resold, this operating manual must be handed over to the purchaser along with it. Contents 1 Notes on using the operating manual . . . . . . . . . . . . . . . . . . . . . . 21 2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . .
_mdc-kuehlschraenke.book Seite 22 Montag, 20. Dezember 2004 3:15 15 Safety instructions COOLMATIC MDC Series 2 1, page 3: this refers to an element in an illustration. In this case, item 1 in figure 2 on page 3. Please observe the following safety instructions.
_mdc-kuehlschraenke.book Seite 23 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC Series Safety instructions z Before starting up the device for the first time, check whether the operating voltage and the battery voltage correspond (see type plate). z Danger of fatal injuries! When using the device on boats: if the device is powered by the mains, ensure that the power supply has a ground fault interrupter circuit.
_mdc-kuehlschraenke.book Seite 24 Montag, 20. Dezember 2004 3:15 15 Intended use 3 COOLMATIC MDC Series Intended use The refrigerator is suitable for cooling and freezing foodstuffs. The device is also suitable for use on boats. If you wish to cool medicines, please check if the cooling capacity of the device is suitable for the medicine in question. 4 Scope of delivery Quantity 1 1 1 4.
_mdc-kuehlschraenke.book Seite 25 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC Series 5.1 Setting up and connecting the cooling device Operating and display elements No. in 1, Explanation page 3 1 Temperature controller 2 Error code LED 3 Operating panel with ventilation slots (only MDC-90 and MDC-110) Error codes in the error code LED, see the “Troubleshooting” chapter on page 33.
_mdc-kuehlschraenke.book Seite 26 Montag, 20. Dezember 2004 3:15 15 Setting up and connecting the cooling device 6.2 COOLMATIC MDC Series Sealing system The cooling device has a locking mechanism to protect it during transport. The following settings are possible: – Position 1 (transport lock): (3 1, page 4) The door is locked and secured. To open the door, turn the bolt to position 2. – Position 2 (releasing transport lock): (3 2, page 4) The door can be opened.
_mdc-kuehlschraenke.book Seite 27 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC Series 6.4 Setting up and connecting the cooling device Changing the decorative plate You can change the decorative plate on your cooling device to improve the appearance. This is how to change the decorative plate: ➤ Remove the screws 1 and 3 (5 1 and 3, page 5). ➤ Remove components 2 and 4 (5 2 and 4, page 5). ➤ Pull down the old decorative plate out of the door frame.
_mdc-kuehlschraenke.book Seite 28 Montag, 20. Dezember 2004 3:15 15 Setting up and connecting the cooling device COOLMATIC MDC Series Connecting to a battery The cooling device can be operated with a 12 V or 24 V DC voltage supply. To avoid voltage loss and therefore a drop in performance, the cable should be kept as short as possible and should not be interrupted if this is possible. For this reason avoid additional switches, plugs or power strips.
_mdc-kuehlschraenke.book Seite 29 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC Series Operation Connecting to 230 V mains supply Danger of fatal injuries! Never handle plugs and switches with wet hands or if you are standing in a puddle. If you are operating your cooling device on board a boat with a mains connection of 230 V from the land, you must install a ground protection circuit breaker between the 230 V mains supply and the cooling device. Seek advice from a trained technician.
_mdc-kuehlschraenke.book Seite 30 Montag, 20. Dezember 2004 3:15 15 Operation COOLMATIC MDC Series ➤ Switch the cooling device on by turning the knob (1 A, page 3) to the right. After switching on, the cooling device requires approx. 60 s until the compressor starts up. Caution! Ensure that the objects placed in the cooling device are suitable for cooling to the selected temperature. Setting the temperature You can set the temperature to any level using the knob.
_mdc-kuehlschraenke.book Seite 31 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC Series Operation z Wrap food in aluminium foil or cling film and shut it in a suitable box with a lid. This ensures that aromas, the shape and the freshness are better conserved. Securing the refrigerator door You can prevent the refrigerator door from being opened inadvertently. ➤ Put the locking mechanism on the top of the door to position 1 (3 1, page 4).
_mdc-kuehlschraenke.book Seite 32 Montag, 20. Dezember 2004 3:15 15 Cleaning and maintenance 8 COOLMATIC MDC Series Cleaning and maintenance Caution! Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the cooling device. Caution! Never use brushes, scouring pads or hard or pointed tools to remove ice or to loosen objects which have frozen in place. ➤ Clean the cooling device regularly as soon as it becomes dirty with a damp cloth.
_mdc-kuehlschraenke.book Seite 33 Montag, 20. Dezember 2004 3:15 15 COOLMATIC MDC Series 11 Troubleshooting Troubleshooting Error code LED The error code LED indicates various faults with a different number of flashes. One flash lasts a 1/4 of a second. The error codes are repeated every 4 seconds. Number of flashes Error type Possible cause 1 Battery protection shut The battery voltage is outside of the set range down 2 Fan overvoltage shut down The fan is consuming more than 0.
_mdc-kuehlschraenke.book Seite 34 Montag, 20.
_mdc-kuehlschraenke.book Seite 35 Montag, 20.
