User manual

18
No. Quantity Designation Item no.
12 Heating element, seat (see A1) MSH-S-50
22 Heating element, backrest (see A2) MSH-L-50
31 Connecting cable MSH-KA-50
w/ relay and switch (see A3)
44 Double-sided adhesive tape
Scope of delivery
Required tools
The following is required for the installation:
–meter rule (see C 1) – drilling machine (see C 5)
–prick punch (see C 2) – screwdriver (see C 6)
–hammer (see C 3) – wrench (see C 7)
–drill bits (see C 4)
The following is required for the electrical connection and testing:
–diode test lamp (see C 8) – electric hair drier (see C 12)
or voltmeter (see C 9) – hatchet iron (see C 13)
–crimp pliers (see C 10) – soldering tin (see C 14)
–insulation tape (see C 11)
Depending on your individual assembly, you may need other screws,
nuts, washers, metal screws and cable clips than those contained in the
scope of delivery.
Caution! WAECO International does not accept any liability for
damages due to the following:
a) Assembly errors
b) Damages to the system caused by mechanical effects and
overvoltages
c) Modifications of the device without the express approval of
WAECO International
d) Use for any purposes other than those described in the
assembly instructions.
Safety and installation instructions
msh-50_q4 15/09/03 9:32 Page 18