Use and Care Manual

Mighty Impact Wrench

™

by Wagan Tech

www.wagan.com

Replacing the Fuse in the 12V Adapter

1. Twist off the upper cover of the 12V adapter tip.

2. Remove the faulty fuse.

3. Insert a new fuse of the same type (spare fuses are included in the case)

4. Twist the cover back onto the Adapter.

Troubleshooting

Problem Possible Solution

The Mighty Impact

Wrench will not start

Check if the vehicle battery is dead

Check if the 12V socket is faulty

Check the fuse in the 12V Adapter of the wrench

A wheel nut cannot be

unscrewed or tightened

Check that the correct rotation direction has been

selected

Speciﬁcations

Voltage 12V DC

Power Draw 8 Amp

No Load Speed 5000 RPM max

Max Torque 271 ft-lb

Fuse Rating 15A, 250V

Square retainer diameter 1/2” (12.7 mm)

Included Socket Diameters 11/16”, 3/4”, 13/16”, 7/8”

(17/19 mm, 21/23 mm)