User`s manual

User’s Manual—Please read before using this equipment

Wagan and wagan.com are trademarks used by Wagan Corporation.

let the cord of the inverter or any plugged in appliance’s cord get wet.

Do not connect the AC inverter directly to another AC power source.

Keep it away from children: The inverter produces power just like your

AC wall outlets at home and should be treated seriously.

Allow at least 2 inches of clearance around the inverter for air ﬂow.

If you operate the inverter in a moving vehicle, you need to secure the

inverter to prevent it from shifting around while the vehicle is moving.

If there is anything wrong with the inverter, disconnect all of the power.

The followings operation will damage and void the warranty of the

inverter:

Reversing polarity by connecting the wires to the incorrect terminals.

Connecting a battery charger to replenish the car battery without

disconnecting the inverter ﬁrst.

Connecting the inverter to a power source greater than 15 Volts DC.

Operating the inverter and battery in or around water.

BASIC OPERATION

Determine the right operating voltage for both input and output of the

inverter.

Connect (+) from the inverter to (+) of battery terminal and connect (−)

from inverter to (−) of battery terminal.

Turn ON the power switch that is located at the front of the inverter, and

the green LED light will light as indicator that the unit is working.

Plug your appliances into AC sockets at the front of the inverter.

•