Specifications

Enquiry Specification for Wagon Tippler with Side Arm Charger and Associated works
NRO/CON/WT/533
EPI – New Delhi Volume-2B, Rev.0 Page 3 of 63
2.0 SCOPE OF SUPPLY
The scope of the supply includes Design, engineering, manufacture, shop
fabrication. assembly, testing and inspection at manufacturer’s works,
packing , dispatch, transportation, delivery to site, receipt, required
fabrication at site, completion of facilities, performance guarantee testing,
final painting at site and handing over to BSP, SAIL and supervision of
installation, testing & commissioning of WAGON TIPPLER with SIDE
ARM CHARGER and ASSOCIATED WORKS as per specifications and
scope defined in tender documents complete with all accessories and
electrical, which are not mentioned specifically but are required for the
efficient and trouble free operation of the equipment/system.
Following items are also included in vendor’s scope.
(i) Complete wagon tippler with side arm charger as per the details given in
the specifications except civil works.
(ii) Consumables like first fill of lubricating oils etc. for the initial operation of
the equipment till handing over.
(iii) Commissioning spares and start-up spare parts.
(iv) Special tools & tackles, if any required.
(v) Recommended spare parts for (3) three years trouble free operation and
maintenance.
(vi) Painting of complete equipment (including final painting before handing over
to the Employer).
(vii) Supervision of Installation, testing & commissioning at site.
(viii) All drawings / documents along with operation and maintenance manuals as
per requirement mentioned elsewhere in the tender document.
(ix) Getting approval of design/drawings and any other design calculation
related to the equipment from BSPI / MECON / EPI.
(x) Power supply at 415V+
10%, 50Hz ±5% and combined voltage & frequency
variation ±10% shall be provided at vendor’s Main Panel / control desk and
equipment JB’s only. However supply of MCC and control as required shall
be in vendor’s scope. .
(xi) Trailing / Flexible Cables as required for the complete system shall be in
vendor’s scope.