Specifications

Enquiry Specification for Wagon Tippler with Side Arm Charger and Associated works
NRO/CON/WT/533
EPI – New Delhi Volume-2B, Rev.0 Page 57 of 63
(7) All tools and tackles, apparatus, special instruments required for
erection, testing, commissioning and establishment of the Performance
Guarantee Test, measurements required for establishing the pollution
control norms and such other instruments, as required, shall be
arranged by the successful Bidder. After commissioning, the successful
Bidder shall handover all the special tools & tackles to the Purchaser as
per the requirement given in SBD.
(8) The successful Bidder shall supply all required consumables, initial fill,
oil, lubricants, construction and erection materials including but not
limited to shims, packing plates, joining compounds, kerosene, solvents,
sealing compounds, tapes, connectors, brazing and soldering materials,
welding and brazing gases and rods, electrodes and wires, erection
bolts, nuts, rivets, piano wire, packing sheet and packing compounds,
temporary supports, spacer templates, jute and cotton waste cloth, sand
and emery paper etc. for the commissioning of the plant.
(9) For load testing of handling equipment, loads shall have to be arranged
by the successful Bidder. Electrical/ operation tests, as per standard
practice, shall also be arranged and completed by them.
(10) All materials, equipment, tools, tackles etc. brought at site by the
successful Bidder within the plant area shall not be removed without the
written permission of the Purchaser. Similarly, all enabling works
built/erected and/or acquired by them within the plant premises shall
not be dismantled and removed without the written permission of the
Purchaser.
(E) General tools and tackles A list of general tool and tackles to be supplied
shall be indicated as per the format given in schedule at Chapter 12.
(F) Information/ Data on Spares and Consumables
The list of Spares & consumables shall be furnished by the successful
Bidder as required in SBD. However, the successful Bidder shall furnish
various information regarding spares, consumables, tools & tackles etc.
as per the schedules indicated in chapter 12 of this Technical
Specification.