User`s manual

Elite

™

1000W Pro by Wagan Tech

www.wagan.com

Wagan Tech and wagan.com are trademarks used by Wagan Corporation.

PRODUCT FEATURES

ON/OFF Switch

GFCI protected AC outlets

Digital Display Fault indicator LED (Red)Operating LED (Green)

Ground terminal

Front Panel

The Front Panel view shows the inverters ON/OFF Switch, Indicators, AC Outlets, and Ground

Terminal.

• ON/OFF Switch: This switch controls AC output of the inverter.

• Operating LED (Green): When this green LED is lit, the inverter is operating normally.

• The FAULT indicator turns RED as the inverter shuts down because of: Excessive Temperature,

Overload, Under Voltage, or Over voltage.

Immediately turn off all AC appliances if the FAULT LED is lit. Allow the inverter to cool

before continuing. Make sure that the ventilation vents are not blocked.

If an inverter “shutdown” was preceded by a buzzing sound, there may excessive load, in

combination with a low voltage or cable problem.

Observe the Digital Display for low battery voltage. The normal operating range is 22V to

30V DC.

• Digital Display: The Digital Display Shows the DC Voltage input that the inverter senses at

its terminals. Low battery, excessive load for the cables can cause a low voltage reading

and inverter shutdown. Low battery is also indicated when the Audible Alarm sounds. An

alternative display shows the KW of Load that the inverter can handle.