User`s manual

Wireless Handsfree Car Kit by Wagan Tech

Wagan and wagan.com are trademarks used by Wagan Corporation.

18. Putting a Call on Hold

When answering a call with the Wireless Handsfree Car Kit, press the

decrease (-) volume key for 2~3 seconds until you hear one low pitched

tone sound, then the call will be put on hold. If there is another incoming

call, the unit will answer it automatically.

Press the decrease (-) volume key for 2~3 seconds until you hear one low

pitched tone sound to end the call hold function. Also do this to take the

caller off hold.

Note: To activate this function, please make sure the assigned

telecommunications agent provides this service. Please refer to the

instructions of your mobile phone manual to make sure your phone

program supports this function.

19. Putting One Call On Hold while Answering a Second Call

While you are answering Call 1 from the Wireless Handsfree Car Kit

and getting an incoming call, you will be notiﬁed by two low pitched

tones.

Press and hold the decrease (-) volume button for 2~3 seconds until

you hear one low pitched tone sound followed by the music. Call 1

will be put on hold and the incoming call (Call 2) will be answered

automatically.

Note: To activate this function, please make sure the assigned

telecommunications agent provides this service. Please refer to the

instructions of your mobile phones manual to make sure your phone

program supports this function.

20. Three–way Calling

While you are answering Call 1 from the unit and have an incoming

call, you will hear the two low pitched tones sound.