User Manual

2
EN
IMPORTANT SAFETY INFORMATION
Read all safety information before operating the
equipment. Save these instructions.
To reduce the risks of fire or explosion, electrical shock and
the injury to persons, read and understand all instructions
included in this manual. Be familiar with the controls and
proper usage of the equipment.
EXPLANATION OF SYMBOLS
Indicates a hazardous situation which,
if not avoided, could result in death or
serious injury.
IMPORTANT:
This symbol indicates a potential hazard
to you or to the equipment. Important
information that tells how to prevent
damage to the equipment or how to
avoid causes of minor injuries will follow.
Danger of electric shock
Danger of fire from solvent and paint
fumes
Danger of explosion from solvent, paint
fumes and incompatible materials
i
Notes give important information which
should be given special attention.
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a
cord having a grounding wire with an appropriate grounding plug.
The plug must be plugged into an outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
WARNING - Improper installation of the grounding
plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect
the green grounding wire to either at blade terminal. The wire with
insulation having a green outer surface with or without yellow stripes
is the grounding wire and must be connected to the grounding pin.
Check with a qualied electrician or serviceman if the grounding
instructions are not completely understood, or if you are in doubt
as to whether the product is properly grounded. Do not modify the
plug provided. If the plug will not t the outlet, have the proper outlet
installed by a qualied electrician.
This product is for use on a nominal 120 volt circuit and has a grounding
plug that looks like the plug illustrated below. Make sure that the
product is connected to an outlet having the same conguration as
the plug. No adapter should be used with this product.
Grounded Outlet
Grounding Pin
Cover for grounded outlet box
IMPORTANT ELECTRICAL INFORMATION
Use only a 3-wire extension cord that has a 3-blade grounding plug
and a 3-slot receptacle that will accept the plug on the product.
Make sure your extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the current
your product will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating. A 14 gauge or
12 gauge cord is recommended. If an extension cord is to be used
outdoors, it must be marked with the sux W-A after the cord type
designation. For example, a designation of SJTW-A would indicate
that the cord would be appropriate for outdoor use.
IMPORTANT: Household use only. Intended for indoor/outdoor
use ONLY with materials having ashpoint above 100ºF (38ºC).