BEFORE YOU BEGIN 16 This section contains instructions that will be repeated throughout this manual. Read and understand this section before using the equipment. A Be careful when handling the spray gun 50 you do not accidentally spray yourself. The high pressure paint stream could pierce your skin causing serious injury. If an accident happens see detail procedures In the Safety Information section on pages 3-4. See physician immediately and bring this instruction manual.
LOAD MATERIAL These steps will prime the system and get it ready to spray. wer. YOU WILL NEED = The material you plan to spray ¢ Extension cord = Waste bucket (4) Recommendation: It is good practice to perform the steps on this page using water to familiarize yourself with the function of the unit as well as to ensure the unit is set up properly. (3) Recommendation: Always use new spray material or material that has been thoroughly strained.
SPRAYING iz Follow these steps to deliver spray material from the material container to the spray gun. YOU WILL NEED Waste bucket Scrap material / cardboard Drop cloths to protect floors and furnishings from over spray Make sure the tp guard is removed. Point the spray gun into a separate waste container. Unlock the spray gun trigger. Squeeze and hold trigger for steps 2-3. Slowly turn the pressure control knob clockwise to setting ‘2. Turn the PRIME/SPRAY knob to SPRAY.
