User manual

D
48
W 990 Flexio
GB
48
W 990 Flexio
•
Remove the adjustment ring (g. 29, 1)
carefully from the union nut (2).
•
Unscrew the union nut (g. 29, 2) and
remove the air cap (3), air screen (4) and
nozzle (5).
i
Never clean seals, diaphragm and
nozzle or air holes of the spray gun
with metal objects.
Do not immerse in solvent, only wipe.
•
Clean the air cap, air screen, nozzle seal, and
nozzle with a brush and water.
•
Assemble the parts again (see “Assembly”).
Assembly
Attention! Never operate the
device if the nozzle seal (g. 30,
6) is either damaged or missing.
If the nozzle seal is either missing
or damaged liquids can enter the
device and increase the risk of an
electric shock.
•
Check the nozzle seal (g. 30, 6) in the
nozzle.
•
Place the nozzle (g. 31, 5) on to the gun
body with the recess facing downwards.
Attention: Position of needle must be
congruent with the nozzle aperture. (Fig.
32)
5


1
2 3
5
4
6