SDS

PRODUCT INFORMATION SH EET
Page 2 of 8
Warning:
No exposure during routine handling of product. Hydrofluoric Acid exposure during firefighting: This
information is given for the use of professional fire fighters responding to a warehouse fire where fire from other
materials may incinerate batteries. This section is provided solely in case of exposure, during firefighting, to the
combustion by‐products.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Composition:
Ingredient
Chemical Name
CAS #
Concentration (%)
Electrolyte
Electrolyte salt and solvent
Various
5-25
Electrolyte solvent
Organic solvent (e.g. Ethylene carbonate,
Dimethylcarbonate)
Various
5-25
Electrolyte salt
Lithium hexaflurophosphate (LiPF6)
21324-40-3
0.05-5
Cathode
Lithium transition metal oxide/ Lithium metal
phosphate
Confidential
20-60
Anode
Graphite/Carbon, others
Various
10-30
Cathode substrate
Aluminium
7429-90-5
1-10
Anode substrate
Copper
7440-50-8
1-15
Binder
PVDF, SBR, others
Various
<5
Others
Steel, nickel, other inert components
Various
Balance
SECTION 4: FIRST AID MEASURES
No exposure during routine handling of product. Risk of exposure occurs only if the battery is mechanically or
electrically abused. No effect under routine handling and use to eyes, skin or if inhaled. Ingestion is not likely,
given the physical size and state of the cell. If swallowed, seek medical attention immediately.
If exposure to internal materials within cell due to damaged outer casing the following actions are recommended:
Eye contact:
Rinse eyes with water for 15 minutes without rubbing and seek medical attention.
Skin contact:
Wash area thoroughly with soap and water. If irritation continues seek medical attention.
Inhalation:
Leave area immediately and move to fresh air and seek medical attention.
Ingestion:
If swallowed, contact POISON CONTROL CENTER immediately.
SECTION 5: FIREFIGHTING MEASURES
NFPA 704 Hazard Class HMIS