Specifications

34 35
Ball valve / metallic
1/2 - 6”, class 600 - 2 500, -196 °C, API 6D | AP
CONSTRUCTION
Full or reduced bore, two or three piece body, oating ball, relief
seats metal-metal, anti-static device, re safe, pressure balance
hole in ball, blow-out proof stem.
CHARACTERISTICS
High performance low emission double stung box.
Internal wetted parts are in acc. to NACE Standars MR0175.
Floating ball valve / 3-piece
1/2 - 6”, class 600 - 2 500, API 6D | AP
CONSTRUCTION
Full or reduced bore, two or three piece body, oating ball, relief
seats, anti-static device, re safe, pressure balance hole in ball,
blow-out proof stem.
CHARACTERISTICS
High performance low emission double stung
iInternal wetted parts are in acc. to NACE Standard MR0175.
Ball valve / stainless steel /
3-piece
DN 15 - 100, 1.6 - 6.4 MPa | Q11F-16P/R (3PC)
The Q11F-16P/R is a thread ball valve that can accommodate 1.6
to 6.4 Mpa of pressures in DN15 to DN100 with thermal range
of -20
0
C to 60
0
C. This PTFE seated valve has a body material
of SS304, SS304L, SS316, and SS316L that strictly complies to
GB, ANSI, DIN, and JIS standards.Connection Ends: Threaded
(Female/Female), Butt welded, Socket welded (BW, SW),
Flanged end
Thread standard: NPT, BSPT. BSP. DIN2999
Testing: API 598
Buttery ap valve / check
DN 32 - 600, 0 - 8 bar | RSK series
This device manufactured by Gemu, is an RSK series buttery
check valve that features a self acting operation. It is capable of
working with an operating pressure of 0-8 bar with a nominal
diameter of 32-600. In addition, it is composed of a PVC-U , PP
or PVDF valve body material.Low pressure drop
100% tight shut o
Lubrication system valve
AO series
The Air/Oil AO Series Valve is a series progressive monitoring
valve manufactured by Graco. It identies air line or oil line
erros in a system and it consists of a manifold, an air sensor, and
check valves. Its key features include a easy-to-use manifold de-
sign that can be attached to a standard Graco series progressive
divider valve assembly and a check valve design that provides
prevention of oil from being forced into the air system.
It can be used in dierent industries including paper mills and
saw mills.
Vortex ow meter / steam
OPTISWIRL 4070
The OPTISWIRL 4070 Vortex Flowmeter is a state-of-the-art
equipment that is a pioneer in using built-in pressure and
temperature compensation in 2-wire technology. It is perfect
for a variety of applications such as vapour and saturated steam
measurement, steam boiler monitoring, compressor output
monitoring, etc. in chemical, oil and gas, power plants, food
and beverage and many more industries. It is extremely reliable
equipment in terms of measurement of standard volumetric
and mass ow of conductive and nonconductive liquids, gases
and vapours, even in continuously changing pressures and
temperatures. It is conveniently operated through plug & play
and is maintenance-free.
Gate valve / pressure-seal
3/8 - 2”
SUNGO VALVE produce Forged steel gate valve,our company is a
specialized supplier and manufacturer of Forged steel gate valve
in china.Our Forged steel gate valve in the worldwide and enjoy
good fame,If you are interested in any of Forged steel gate valve
or your customers require to ll, please contact us right now
Rising plug valve
DN 25 - 300, PN 10 - 40, -100 °C ... +400 °C |
72.4 series
The Type 72.4 MAXIFLUSS Rotary Plug Valve, manufactured
by VETEC, has a two-eccentric plug layout. It is available in a
plug type housing design with cast steel or stainless cast steel
materials.
Unloading relief valve /
low-pressure
DN 50 - 100, max. 224 mbar | 66R series
max. 20 psi | R-6100 series
The 66R series is more than just a simple vapor recovery
regulator, because of its fast response to changes and accurate
control of gas ow. The item also comes with a vacuum source,
placed on the regulator’s outlet, which you can use for increased
ow capacity of any blanketing system operating under a low
pressure. Finally, build-up is decreased by a pilot, which also
makes the item even more accurate.
Ball valve / wafer
DN 20 - 100, PN 16 | 232 series
Cast iron body. Chromium plated brass ball. PTFE + graphite
seats. Brass
stem. Steel lever. Connection anges dressed and drilled
(threaded holes)
according to EN 1092-2 PN 16 with raised face.
Needle valve / pressure gauge
1/2”, PN 250 | 525 series
The Gauge Holder Valve from the 525 series is composed of
stainless steel part, carbon steel body and sealing seat. This
device has a needle disc which is integrated with carbon steel.
It also has a hand wheel made of steel plate, NPT connections
which are threaded and resetting screw.
Electromagnetic ow meter /
wet / water
max. 48 858 m³/s | OPTIFLUX 2000
Engineered and manufactured for the water and wastewater
industry
Wide range of approvals for potable water
Long-term reliability and negligible maintenance
The OPTIFLUX 2000 electromagnetic ow sensor is the opti-
mum solution for water and wastewater applications.
Its long-term reliability and durability make it the standard
ow sensor for the water industry for measuring abstraction
water, drinking water, wastewater, sewage and euent.
VALVES