Specifications

42 43
WELDING CONSUMABLES
ARCALOY 308/308H-16
Arcaloy 308/308H-16 electrodes were designed for the welding Types 304H & 304 where temperature in excess of 700°F
(371°C) requires additional creep strength. They can equally well be used for the welding of stainless steel Types 301,
302 and 305. In some cases where the creep ductility of 347 weld metal is a concern, Arcaloy 308/308H electrodes can be
used. The basic-rutile thin coating of Arcaloy 308/308H-16 gives an excellent combination of welding performance in all
positions and a high resistance to cracking. Operates on AC or DC current.
ATOM ARC 10018
Atom Arc 10018 electrodes are used primarily for applications which require weld
joints of at least 100 ksi (690 MPa) tensile strength, good ductility and crack resist-
ance. Good notch toughness at temperatures as low as -60°F (-51°C) is possible with
this electrode. Atom Arc 10018 can be used to weld HY-80 and T-1 steel.
SUREWELD 7024
Sureweld 7024 is a high speed, heavy-coated, iron powder electrode for high deposition rates on horizontal and down-
hand welding. Excellent operator appeal, produces equal 45° llets, thereby eliminating over welding. Excellent bead
appearance and self-cleaning slag. This electrode has good weldability and superior mechanical properties. It is particu-
larly useful in obtaining increased penetration with little or no root porosity in horizontal or positioned llets. Sureweld
7024 is ideal for making high speed horizontal llet and lap welds on mild and some alloy steels, such as earthmoving and
construction equipment, truck bodies, ships, barges and railcars. Sureweld 7024 exceeds the AWS A5.1 elongation% and
Charpy v-notch requirements for 7024-1.
MIGMASTER 215 Pro/280 Pro
The MigMaster 215 Pro/280 Pro are sturdy and robust
step-controlled welding power units. They are intended for
medium (215 Pro) to heavy-duty (280 Pro) MIG/MAG welding
with solid wires of steel, stainless steel, or aluminum, as well
as cored-wires with or without shielding gas. ESABs proven
technology and software provide reliability and outstanding
welding performance.
CADDY MIG C200i
The Caddy Mig C200i is an easy-to-use, intelligent and powerful ma-
chine for MIG/MAG welding mild steels, aluminum and stainless steel
as well as MIG brazing. The unit is also extremely portable, making
the Caddy Mig C200i an excellent choice for repair, maintenance, and
assembly work – both in the workshop and while on the go.
MT-250SG
Features
• Designed for use with the Migmaster Compacts
• Weighs less than 3 lbs.
• Uses durable MT contact tips and nozzles
• Powerful gear motor in handle pulls welding wire
from 4 in. diameter spool in the molded gun case
• Partial depression of the torch trigger controls gas
pre- and post-ow operations - full depression
provides wire feeding as well as gas ow
• Wire feed control mounted on gun provides pre-
cise adjustment of wire feed rate at torch MT-250
SG Spool Gun MT-250 SG
• Spool holder adjusts to balance in the operators
hand
• 25 ft. service lines
ORIGO MIG 320/410
The Origo MIG 320/410 are step-switched power sources for me-
dium (320) to heavy-duty (410) MIG/MAG welding. The machines
are made with a strong galvanized metal casing to withstand
harsh environments. Its large wheels, sturdy lifting eyelets, and an
undercarriage designed for forklift transport make the Origo MIG
machine easy to move. The wide current and voltage make it easy to
optimize settings for a wide variety of ller metals and gases.
ORIGO MIG 320/410
The Origo MIG 320/410 are step-switched power sources for me-
dium (320) to heavy-duty (410) MIG/MAG welding. The machines
are made with a strong galvanized metal casing to withstand
harsh environments. Its large wheels, sturdy lifting eyelets, and an
undercarriage designed for forklift transport make the Origo MIG
machine easy to move. The wide current and voltage make it easy to
optimize settings for a wide variety of ller metals and gases.
ST-21 Water-Cooled
GMAW Gun
Rated at 600 Amps with any shielding gas
Handles ux cored wires to 7/64 in
• Service lines enter the rear of gun instead of handle
for improved balance and accessibility
• Inching pushbutton mounted on bottom of handle
• 30 ft. service lines
• Designed for use with Migmaster Compacts
• Weighs less than 3 lbs.
• Uses durable contact tips and nozzles
• Powerful gear motor in handle pulls welding wire
from 4 in. diameter spool in the molded gun case
• Partial depression of the torch trigger controls gas
pre- and post-ow operations - full depression
provides wire feeding as well as gas ow
• Wire feed control mounted on gun provides precise
adjustment of wire feed rate at torch
Rugged 250 Amp,
100% duty cycle performance