Specifications
44 45
WELDING CONSUMABLES
CRYO-SHIELD 308L
Cryo-Shield 308L is an all-position wire adaptable to
a variety of shop and eld erection applications. The
use of argon/CO2 gas shielding is recommended for
maximum toughness. Designed for cryogenic applica-
tions where good weld metal toughness is required.
Applications include cryogenic vessel fabrication and
process piping repair. Cyro-Shield 308L is guaranteed
to produce a minimum of 15mils lateral expansion at
-320°F.
SHIELD-BRIGHT 410 NIMO
Shield-Bright 410NiMo is an all-positional gas shielded
ux cored wire for fabrication and repair of hydroelec-
tric turbine “runners” and other similar applications.
Its spray-like transfer enhances the arc characteristics
while minimizing post-weld clean up and rework.
The ease of use and “user-friendly” characteristics
minimize training while producing consistent quality
welds. The self-peeling slag removal and easy post-
weld clean up minimize the cost to deposit while
improving performance eciency. This electrode is
designed for use with Argon/CO2 shielding gas (75 to
80% Argon, balance CO2).
DUAL SHIELD 700X
Dual Shield 700X is a high deposition, deep
penetration wire for joining of heavy structural steel
components. Designed for at and horizontal position
welding using CO2 shielding gas, this X Series wire
provides high deposition rates, high eciency and
excellent performance. The bead contour, smooth
ripple and slag chemistry allow easy slag removal even
in narrow groves.
OK TIGROD 308L
• OK Tigrod 308L has a good general corrosion resist-
ance. It also has a low carbon content which makes
this alloy particularly recommended where there is
a risk of intergranular corrosion. The alloy is widely
used in the chemical and food processing industries
as well as for pipes, tubes and boilers.
• For joining of stainless steels of 18% Cr - 8% Ni-type
with low carbon content and Nb-stabilized steels
of the same type if the service temperature will not
exceed 6500C.
OK AUTROD 13.20SC
• ESABs OK Autrod 13.20SC is a copper-coated low
alloy submerged arc wire designed for the welding
of creep-resistant steel of the (2.5% Cr) (1% Mo)
type. When combined with OK Flux 10.63, OK Autrod
13.20SC produces a metalurgically clean weld which
is capable of meeting X-factor of less than 15. This
combination fullls the stringent requirements for
toughness after step cooling treatment of the weld
metal. OK Autrod 13.20SC can also be combined
with OK Flux 10.62 for applications not requiring
step cooling treatment.
• OK Autrod 13.20SC is used for welding process
piping, heat exchangers, and pressure vessel
fabrication.
DUAL SHIELD II 100
Dual Shield II 100 is an all-position ux cored electrode
that combines a high strength deposit with excellent
impact toughness and low diusible hydrogen levels.
The rutile basic slag system produces a smooth spray-
like transfer with reduced spatter and low post weld
cleanup. Dual Shield II 100 is designed to join high
strength steels such as HY-80 and T-1 the as welded
or stress relieved condition using a 75% Ar / 25%
CO2 shielding gas. It is especially well suited for high
tensile steels that are used in sub-zero temperatures.
The weld metal analysis is similar to an E10018-M low
hydrogen electrode.
CRYO-SHIELD 308L
• Designed for quality TIG welding with all types of
metals
• Extremely easy to use – all welding parameters
displayed in an easy-to-understand format
• Innovative QWave™ feature – enables AC welding
with exceptional arc stability and low noise
• AC frequency and balance control – optimizes weld
pool
• Electrode preheating – facilitates excellent starts
and extends electrode life
• ESAB 2-Program function – allows preprogramming
and program changes during welding
• DC Pulsed TIG welding – for easy control of heat
input and weld pool
• DC Micro Pulse – minimizes area aected by heat,
particularly when working with thin metals
• Hot start, Arc force and polarity switch (DC) – create
true MMA (Stick) characteristics in AC and DC mode
• Equipped with large OKC 50 cable connectors – for
greater durability
• Features compact design with impact resistant
polymer and aluminum casing – makes the unit
lightweight and easy to carry
• Small size does not compromise vital cooling of
internal components
TXH AIR/WATER COOLED
TORCHES
Manufactured with high temperature resistant silicone
rubber insulation, TXH torches are lightweight and
durable. All copper components ensure cooler running
temperatures and maximum current capacity and and
ergonomic handle system with integrated dual soft
grips ensure the handle remains in place with minimal
grip pressure.
Features
• TXH torches are designed to provide the utmost
in convenience, versatility, and ergonomics to the
welder‚‚
• Choose between air-cooled and water-cooled ver-
sions, with or without gas valve, and with or without
a exible neck to suit specic applications
• ‚‚The torch heads are manufactured with high
temperature resistant silicone rubber insulation
• ‚‚All copper components ensure cooler running
temperatures and maximum current capacity
• ‚‚Integrated dual soft grips ensure the handle
remains in place with minimal grip pressure
• ‚‚Positioning of the torch is made easier by the
combination of knuckle joints and a exible leather
section covering the rst 31.5 in. (800 mm) of the
torch immediately behind the handle
ARISTO RT
ROBOTIC TORCHES
The new range of Aristo RT robotic torches oer world
class performance in single arc or tandem applications.
These torches are designed for common robotic
welding applications and are available for the
following robotic packages:
• Standard Wrist (external cable)
• Helix - Hollow Wrist (+/- 220°)
• Inniturn - Hollow Wrist (endless rotation)
Three gas-cooled models and three water-cooled
models are available in dierent swan neck angles
Packages are available for ABB, Fanuc, KUKA, and
Motoman/Yaskawa robotic systems
Special Features
• Built in blow out port can be used for cooling and/or
cleaning of the torch neck
• Long-life consumables, torch body, and spare parts
• Designed for all robot types and models
• Quick-change torch system
• Simple cable replacement
• Air and water-cooled torches use the same spare
parts
• Threaded gas nozzles with additional clamping for
better heat transfer prolongs consumable life
• Optimized gas ow provides stable and reliable
welding arc
Industry Best TCP (Tool Center Point)
Collision-resistant torch design means no re-ad-
justment of the torch neck reducing downtime and
improves productivity
Constant TCP even when changing necks or cables,
reduces part programming and program “touch up”
time