Owner manual

3
English
Setup / Usage:
Storage :
1
Unplug the steamer from the power source.
Wait a minimum of 2 minutes and slowly open the hose
connection.
Drain remaining water from the container. NEVER store
the unit with water in the container.
1

SKIN BURN HAZARD. Water container must
rest on a sturdy, level surface and in upright
position.
Filling the steamer with hot water will greatly reduce the
time to produce steam. A full container will operate for
about 70 minutes.
Max
Max
2
Line up notch in hose receptacle (a) with the guide on the
hose (b). Insert hose and turn clockwise
DO NOT cross-thread
the locking nut.
Connect other end of hose to the steam plate. Hand-

(a) (b)
3
Connect matching end of cord to the steamer. Plug in the
power cord.
Make sure steamer is placed on a sturdy,
level surface.

minutes to produce steam. DO NOT leave steam plate

4

gently score the wallpaper in a crisscross pattern. The
perforations will allow the steam to penetrate the wallpaper.


10 seconds. Move the steam plate to a new section and
remove the steamed section with the scraper blade.
5
DO NOT operate the steamer once the water container
is empty.

minutes. SLOWLY

unit to reheat.
Make sure to wear
gloves and eye
protection.