Technical data

GM 4600AC

OPERATING MANUAL

EDITION 04/2009

Part No. DOC394861

4.1 FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS

The gun is suitable for atomising liquid materials, particularly coating materials, using the AirCoat process.

4.1.1 PROCESSIBLE MATERIALS

Top-coat paints, primer paints, corrosion protection solvents, textured paints, lyes, staining solvents, clear paints,

parting solvents, etc. on a solvent or water basis. If you want to spray other working materials than the afore-

mentioned, turn please to a Wagner agency.

Note: In the event of application problems consult your Wagner branch and/ or the paint

manufacturer.

4 DESCRIPTION

WARNING

Hot coating substances!

Burns

 Wear antistatic protective gloves.

 When operating the unit with a coating material with a temper-

ature greater than 43°C; 109.4°F: Identify the unit with a warning

sticker "Warning - hot surface".

4.2.2 VARIANT FOR APPLICATION RANGE UP TO 25 MPA, 250 BAR, 3625 PSI

Qty Part No. Description

1 394014 GM 4600AC 25 MPa ; NPSM 1/4“ Paint connection

1 2303491 GM 4600AC-H 25 MPa ; NPSM 1/4“ Paint connection

4.2.1 VARIANT FOR APPLICATION RANGE UP TO 16 MPA; 160 BAR; 2320 PSI

Qty Part No. Description

1 394004 GM 4600AC 16 MPa; NPSM 1/4“ Paint connection

4.2 SCOPE OF DELIVERY

These AirCoat gun is available in two different variants. The nozzle size depends on the paint and on the ap-

plication. Therefore the air cap and the nozzle are not included in the scope of supply. For a gun accessories

look in chapter 9.

394004 394014 AirCoat hand gun GM 4600AC

Qty Qty Part No. Description

1 1 394891 CE-conformity

1 1 394860 Operating manual German

1 1 see chap. 1 Operating manual for the other language

For special versions the delivery note applies.

4.2.3 STANDARD EQUIPMENTS

The standard equipment includes: