Technical data

22
GM 4600AC
B_02261
x
A
B
C
D
B_02675
OPERATING MANUAL
EDITION 04/2009
Part No. DOC394861
5.4.3 REPLACING AIRCOAT NOZZLE
1. Relieve spray gun and unit pressure.
2. Secure gun with trigger safety catch.
3. Screw off the union nut (A).
4. Remove air cap (B).
5. Press AirCoat nozzle (C) out of the air cap (B) by hand and brush with cleaning solvent
until all remaining paint has been dissolved.
6. Assembly:
Place AirCoat nozzle (C) in nozzle seal (D).
7. Fit the air cap (B) over the nozzle (C), ensuring that the location fl ats (X) are in line.
8. Fit the union nut with nozzle guard (A) and tighten by hand.
CAUTION
Defective AirCoat nozzle!
Insufficient paint application quality
Do not use sharp-edged objects to treat hard metal on the AirCoat nozzle.
SIHI_0020_GB