Specifications

SP04-2
GREGG DISTRIBUTORS LTD.
TIGER TOOL
Heavy Duty Truck Tools
TIG/3812
L
L
SNAP RING PLIERS
•Uniquely designed jaw easily removes and
replaces Hotchkiss style snap rings on even
the most corroded u-joints •Can also be used
to remove plastic (push-pin) retainers on many
makes and models of vehicles •The 75°
head on the #70301 is designed to provide a
secondary option to access those hard-to-
reach areas
Part No. 70300, Straight head.
Part No. 70301, 75° head.
PIN & BUSHING CORE KIT
•Removes and installs both rubber-isolated and threaded pins and bushings without removing
the spring packs from the axle •The hydraulic cylinder creates 20 tons of pulling power for
quiet, smooth operation •Service time can be reduced by up to 70% on most jobs •Requires
10,000 psi hydraulic power source
Part No. 15000.
ADAPTER KITS FOR #15000
•Select an add-on kit that corresponds with the OEM bushing adapter
KING PIN PRESS KIT
•Designed for use on straight and tapered
king pins from 7/8” to 2-5/32” •Generates over
46,000 lbs of force and weighs only 30 lbs
•User friendly design requires just one person
to operate
Part No. 90150.
LEAF SPRING PIN SOCKETS
•Remove and install even the most stubborn threaded leaf spring and shackle pins
Part No. 15101, International/Kenworth (small), 1.10” x .647”.
Part No. 15102, International/Kenworth (medium),1.13” x .750”.
Part No. 15100, International/Kenworth (large),1.54” x .653”.
Part No. 15104, Western Star (x-large), 1.46” x 1.26”.
Part No. 15103, Volvo/Mack and shackle pins, .945” x .355”.
CORE KIT ONLY. This kit
requires one or more of the
adapter kits listed to the right.
Part No. Application
FRONT SUSPENSION
15004 Kenworth Pin and Bushing #5296, #5295
15005 Kenworth Pin and Bushing #B13-1002, B65-1008, B65-6008, B13-1000
15006 Kenworth Pin and Bushing #B65-1001
15007 Kenworth and Peterbilt Pin and Bushing #B65-6005
15008 Kenworth Pin and Bushing #B65-1012
15009 Kenworth Pin and Bushing #B65-1006
15010 Peterbilt #02-01805 and International #1065H, 1680034C1, 44409C1
15011 Kenworth and Peterbilt Pin and Bushing #B65-1013
15015 Mack Pin and Bushing #10QK254M2
15031 Freightliner and Sterling Pin and Bushing #16-14603-000
15032 Freightliner Bushing #680-322-01-50
REAR SUSPENSION
15012 Peterbilt Air Trac Pin and Bushing
15030 Freightliner Airliner and Peterbilt Low Air Leaf Pin and Bushing
TRAILER SUSPENSION
15040 Hendrickson Tri-Functional Wide (Intraax) Bushing
15041 Hendrickson Tri-Functional Narrow (Vantraax) Bushing
15050 Meritor Tri-Functional Bushing
UNIVERSAL & 5TH WHEEL ADAPTER
15003 Universal Through-Hole Bushing
15060 5th Wheel Bracket Pin Puller
15007
15030 15040
WHEEL STUD
REMOVER &
INSTALLER
•Designed for use on inboard hubs
on trucks and buses •Includes a
10 ton hydraulic cylinder to provide
effective removal of even the most
seized studs in 10 to 15 minutes
•Removal of the hub is not required
Part No. 10608.
Part No. 10611, Manual version.
PITMAN ARM
PULLER
•Designed to remove pitman arms on
Sheppard M110 gearboxes •May be
used with up to a 3/4” impact wrench
Part No. 10389.
PITMAN ARM
PULLER
•Designed to remove pitman arms on
Sheppard M100 gearboxes •Can be
used with up to a 3/4” impact wrench
•Max glove opening is 4.1”
Part No. 10385.
HUB SPINDLE NUT
SOCKET
•Provides a safe way to remove the
8 point spindle nut •Machined from
heat treated alloy steel to prevent
the socket from slipping or spinning
under extreme loads •3-1/4” socket
with 3/4” drive
Part No. 18010.
HUB PULLER
•Designed to remove the most
stubborn hubs with up to 25,000 lbs
of force
Part No. 10901, Removes Fruehauf
hubs.
Part No. 10902, Removes Rockwell
hubs.
ENERPAC
®
10,000 PSI HYDRAULIC PUMP
•Xvari® technology enables the user to better control the hydraulic
application, improving productivity •Ergonomic design reduces operator
fatigue •Closed hydraulic system prevents contamination and allows
pump usage in any position
Part No. 70126.
10901
15103
15101/15102/15100/15104