Specifications
SP04-23
www.greggdistributors.ca
CHECKERS INDUSTRIALCHECKERS INDUSTRIAL
Gorilla
®
Warning Whips
CHE/1568
ALL PURPOSE WATERPROOF LIGHTED WARNING WHIPS
•Gorilla
®
All Purpose Waterproof Warning Whip with stainless steel components sets the new standard for weather
resistance in any working conditions.
•These whips are ideal for extreme weather conditions such as coastal areas, corrosive environments, salt mines, and
areas with high humidity.
•Rocket™ II Super Bright Waterproof LED comes standard with 9 changeable light modes, 7 fl ash patterns, and steady
on or off, which provides a “one light fi ts all” solution
•Premium fi berglass resin creates the strongest whip in the industry
•Internal wire is industrial grade and meets Military Spec MIL-W-16878
•Includes a two conductor waterproof hot plug with 12” pigtail, heavy duty Day Bright™ fl uorescent nylon mesh fl ag with
3M
®
Scotchlite
®
refl ective X, Rocket™ II Super Bright Waterproof Amber LED light, and a stainless steel threaded hex
base
Part No. APW-12-A-OA, 12 ft.
Part No. APW-10-A-OA, 10 ft.
Part No. APW-8-A-OA, 8 ft.
Part No. APW-6-A-OA, 6 ft.
Part No. APW-5-A-OA, 5 ft.
Part No. APW-3-A-OA, 3 ft.
REMOTE CONTROL
•Light patterns are easy to program with remote control
•(9) Flash patterns:
-Breathe followed by 16 strokato fl ashes
-Rapid fl ash
-Brighten then fl ash
-Breathe then fl ash
-Slow blink
-Flash
-Steady
-Increasing sequential blinks
-Off
Part No. REMOTE.
REPLACEMENT PARTS
Part No. A-4LED-CB, Amber 4 LED C Board.
Part No. B-4LED-CB, Blue 4 LED C Board.
Part No. G-4LED-CB, Green 4 LED C Board.
Part No. R-4LED-CB, Red 4 LED C Board.
Part No. W-4LED-CB, White 4 LED C Board.
Part No. RKT-4-LENS, Clear lens.
Part No. WPP-12, 12” Waterproof Pigtail.
Hitch Mounts
2” hitch mount with threaded hex base and 24”
power cord with 7-way plug
Part No. FS7015PC.
2” hitch mount with threaded hex base and 24”
power cord with 7-way plug and backup alarm
Part No. FS7015PC-BU.
2” permanent hitch mount for Super Whip and Heavy
Duty Gorilla Whip with 7-way power cord
Part No. FS7015-PT.
NAOKA INC.
Safety Whips
AUR/2916
AURORA SAFETY WHIPS
Each Vehicle Safety Whip is Canadian made in Northern Alberta. Naoka’s Quality Assurance process meets Canadian Stan-
dards, Exceeds OSSA Requirements, and Redefi nes Industry Benchmarks for Safety Equipment.
Aurora Whip Main Highlights: •Unit is highly visible from a distance - vehicles equipped with the Aurora Whip will be noticed by
larger equipment operators in any weather condition, day or night! •Yellow Flexible Fiberglass Rod provides added safety detec-
tion particularly in the winter months •The 24 encased amber LEDs provides 360° of light
Additional Information: •Naoka research and development testing facility immersed the whip in 3 ft. of water concluding that this
product is watertight; reducing instances of replacement because the elements cannot penetrate Aurora Whip wiring •Methac-
rylate adhesive that absorbs vibration, resists impact, fatigue, thermal cycling/ extremes (-55°C to 121°C) and a tensile strength
of 4,500 lbs. •9,500 psi shatterproof refractive material disperses lighting •Florescent vinyl mesh will overcome the objections
from whipping such as cracking, peeling or fraying •Flame resistant, weather resistant, ultraviolet resistant, temperature stable.
Flexible enough to withstand repeated impacts without breaking. •Steel Spring and Hex-base are also secured with marine grade
materials to prevent water ingression •Military approved polyolefi n, remains fl exible to -55°C, resists diesel fuel, hydraulic fl uid,
lubricating oils •All wiring is well made and insulated to deal with extreme temperatures and exposure to industrial conditions
Part No. AUR3F, 3 ft.
Part No. AUR5F, 5 ft.
Part No. AUR8F, 8 ft.
Part No. AUR10F, 10 ft.










