Specifications

SP04-24
GREGG DISTRIBUTORS LTD.
LIFT SUPPORTLIFT SUPPORT
Gas Spring Lift Supports
QQQ/2558/2559
Part No.
B1-0800-0250-020 8” 5.5” 20
B1-0800-0250-040 8” 5.5” 40
B1-0800-0250-060 8” 5.5” 60
B1-1000-0300-040 10” 7” 40
B1-1000-0300-060 10” 7” 60
B1-1000-0300-080 10” 7” 80
B1-1200-0300-040 12” 9” 40
B1-1200-0300-060 12” 9” 60
B1-1200-0300-080 12” 9” 80
B1-1500-0550-040 15” 9.5” 40
B1-1500-0550-060 15” 9.5” 60
B1-1500-0550-080 15” 9.5” 80
B1-1700-0675-040 17” 10.25” 40
B1-1700-0675-060 17” 10.25” 60
B1-1700-0675-080 17” 10.25” 80
B1-1950-0800-060 19.5” 11.5” 60
B1-1950-0800-080 19.5” 11.5” 80
B1-2000-0800-040 20” 12” 40
B1-2000-0800-060 20” 12” 60
B1-2000-0800-080 20” 12” 80
B3-1200-0400-030 12” 8” 30
B3-1200-0400-090 12” 8” 90
B3-1200-0400-120 12” 8” 120
B3-1500-0500-030 15” 10” 30
B3-1500-0500-090 15” 10” 90
B3-1500-0500-120 15” 10” 120
B3-1700-0600-040 17” 11” 40
B3-1700-0600-060 17” 11” 60
B3-1700-0600-090 17” 11” 90
B3-2000-0800-080 20” 12” 80
B3-2000-0800-100 20” 12” 100
B3-2000-0800-120 20” 12” 120
B3-2000-0800-150 20” 12” 150
B3-2600-1050-060 26” 15.5” 60
B3-2600-1050-090 26” 15.5” 90
B3-2600-1050-120 26” 15.5” 120
B5-2700-1175-060 27” 15.25” 60
B5-2700-1175-100 27” 15.25” 100
B5-2700-1175-120 27” 15.25” 120
B5-2700-1175-150 27” 15.25” 150
B5-2775-1000-200 27.75” 17.75” 200
B5-2800-1200-230 28” 16” 230
Extended Compressed Force (lbs.)
GAS SPRINGS
•Gas Springs are typically used for assisting in lifting a lid as well as holding it open, similar to how a hatchback on a car operates. They are also used on access covers, doors, windows,
conveyors, adjustable table and seats, and more. •All gas springs contain pressurized nitrogen gas as well as hydraulic fl uid that lubricates the seal and provides slam-resistant dampening at
the end of the stroke. You should store and install gas springs rod-end down for longer service life. •The chart below shows universal lift supports which are not application specifi c,
BLACK NITRATED “B” SERIES GAS SPRINGS
All measurements are taken from center of eye or ball stud located at 18 mm centers.
The Nitrate Gas Springs come with composite end fi ttings.
Rod x Tube Diameter
B1 - 6 x 15 mm
B3 - 8 x 18 mm
B5 - 10 x 22 mm
BRACKETS - Steel zinc plate, 10 mm ball
Part No. 700200Z.
Part No. 700500Z.
Part No. 710102Z.
Part No. 710105Z.
Part No. 711302Z.
Part No. 711305Z.
GAS SPRING HARDWARE
Part No. 790110Z, 10 mm steel zinc stud.
Part No. 790810Z, 10 mm steel zinc plate.
Part No. 40302003, 6 x 1 mm end fi tting 10 mm ball.
Part No. 40302004, 8 x 1.25 mm end fi tting 10 mm ball.
Part No. 40302007, 6 x 1 mm end fi tting 10 mm ball.
Part No. 40302008, 8 x 1.25 mm end fi tting 10 mm ball.
Part No. 40303018, 6 x 1 mm blade style end fi t.
Part No. 40303002, 8 x 1.25 mm blade style end fi t.
Part No. 43303001, 6 x 1 mm end fi tting.
Part No. 43305001, 8 x 1 mm HIEM joint fi t.
Part No. 43305003, 6 x 1.25 mm HIEM joint fi t.
Part No. 43306001, 6 x 1 mm rod end fi tting.
Part No. 43306002, 8 x 1.25 mm rod end fi tting.
TEK OPTICALTEK OPTICAL
Universal Sideshields
NNN/3725
COMPLIANCE SAFEPACK™ PLUS
The CP-5226 Compliance Safepack™ Plus consists of ten (10) of the patented B-52+ Aye-Mate™
& ten (10) of the patented B-26+ Wing-Mate™ sideshields. Ideally suited to ensure proper selection
of the proper sideshield/frame combination. The inclusion of both sideshields in the same package
also offers the best solution to a multitude of issues created by hundreds of proprietary temple
mounted sideshields and the need to be OSHA compliant. One CP-5226 Compliance Safepack™
Plus easily conquers the challenges posed by OSHA, ANSI, and all of the different frame shapes
and sizes from a single dispensing pack.
Part No. CP-5226, Safepack™ Plus, contains 10 each #B26 and #B52 sideshields.
With patented SafetyWing™ feature. Available in single pairs or convenient packs of 10.
Part No. B26, 1 pair, B-26+ Wing-Mate™ sideshield; for small and medium safety frames.
Part No. B52, 1 pair, B-52+ Aye-Mate™ sideshield; for small, medium, and large safety frames.
B52
CP-5226