Operation Manual

GB
12
DTS 5800
Warning
If the supply cord of this appliance is
damaged, it must only be replaced
by a repair shop appointed by the
manufacturer, because special purpose
tools are required.
The wires in this mains lead are coloured
in accordance with the following code:
green/yellow = earth
blue = neutral brown = live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identi ying
the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal in
•
the plug which is marked with the letter E or by the earth symbol or coloured green or
green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked
•
with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked
•
with the letter L or coloured brown.
Should the moulded plug have to be replaced, never re-use the defective plug or
•
attempt to plug it into a di erent 13 A socket. This could result in an electric shock.
Should it be necessary to exchange the fuse in the plug only use fuses approved by
•
ASTA in accordance with BS 1362. Only 13 Amp fuses may be used.
To ensure that the fuse and fuse carrier are correctly mounted please observe the
•
provided markings or colour coding in the plug.
After changing the fuse, always make sure that the fuse carrier is correctly inserted.
•
With out the fuse carrier, it is not permissible to use the plug.
The correct fuses and fuse carriers are available from your local electrical supplies
•
stockist.