Manual

English
8
2. Load
Material
Start
1. Push the red inlet
release button to
ensure proper inlet
valve operation.
4. Hold return tube over
waste bucket until
material is owing
(approximately ve
seconds).
2. Unclip the suction hose and return
tube. Place suction hose into material
container (a). Place return tube into a
waste bucket (b).
5. Turn power OFF.
3. Plug in the sprayer. Turn the
PRIME/SPRAY knob to PRIME.
Turn the power ON.
6. Place return tube into material
container and clip tube and
suction hose together.
You will need:
• The material you plan to spray
• Extension cord
• Waste bucket
1
4
l
O
2
5
3
6
l
O
ON
PRIME
OFF
(a)
(b)