Manual

English

Safety

Spraying

Troubleshooting -

Clean the

Inlet Filter

You will need:

• Warm, soapy water for latex material

• Mineral spirits for oil based materials

IMPORTANT: Make sure your floors and

furnishings are covered with drop cloths to

prevent accidental drips.

1. Unscrew the inlet lter from the tting on the end of the

suction tube.

3. Replace the cleaned lter by threading it back into the

tting on the end of the suction tube.

2. Clean the lter using the appropriate cleaning solution

(warm, soapy water for latex materials, mineral spirits

for oil-based materials).