Manual

17
English
5. Remove the inlet lter from
the suction tube and place
it into waste container.
6. Thread pump cleaning
adapter onto garden hose.
Thread suction tube tting
over the adapter.
7. Unclip the return tube from the suction tube
and place it into the waste container. Turn
the PRIME/SPRAY knob to PRIME.
8. Turn the water supply to the garden hose on.
Turn the pump ON. Water will go into the
suction tube and out through the return tube.
Let the pump run for a few minutes, and
leave pump running for next steps.
9. Point the spray gun at the side of
a waste container.
10. While squeezing the trigger, turn the
PRIME/SPRAY knob to SPRAY -
MINIMUM PRESSURE.
11. Continue squeezing the trigger
until uid is coming out clear.
12. Perform Pressure Relief
Procedure, page 7.
5 6 7 8
9
PRIME
10 11 12
l
O
PRIME
ON
CLEAN ROLLCLEAN ROLL
MAX
MAX