Manual

English
18
Cleanup -
Oil-Based
Materials
Follow these steps if you sprayed oil-based

and do not have a garden hose available.
Be sure to use the appropriate cleaning
solution for the type of material sprayed.
You will need:
• Mineral spirits if using oil-based material
• Warm, soapy water if using latex material
• Waste container
1. Perform Pressure Relief Procedure
(page 7).
2. Remove the spray tip and
place into an empty waste
container.
3. Submerge suction set into a bucket
with the appropriate cleaning
solution.
4. Point the spray gun at the side of
a waste container. Ground the
gun against the side of a metal

mineral spirits.
5. While squeezing the trigger, turn the power
ON, and turn the PRIME/SPRAY knob to
SPRAY - MINIMUM PRESSURE.
6. Continue squeezing the trigger
until uid is coming out clear.
You may need to get new
cleaning solution.
7. Perform Pressure Relief
Procedure, page 7.

mineral spirits repeat the steps on

2
PRIME
1
3
4
l
O
PRIME
5 6 7
ON
CLEAN ROLLCLEAN ROLL
MAX
MAX