Manual

19
English
Cleaning the
Spray Gun
Components
You will need:
• Soft bristled brush
• Light household oil
• Warm, soapy water if using latex material
• Mineral spirits for oil based material
• Wrench
1. Peform the Pressure Relief
Procedure, page 7.
4. Pour a few drops of light
household oil inside gun housing.
5. Install gun lter tapered-end rst.
Reassemble spray gun.
6. Install spray tip with arrow pointing
towards front of spray guard tip.
7. Install spray tip and guard
assembly.
2. Pull trigger guard to separate
from lter housing and
unscrew housing using a
wrench
3. Remove lter from spray gun. Clean
spray tip and lter with soft bristled
brush and appropriate cleaning
solution
PRIME
1
4 5 6 7
2 3
HOUSEHOLD
OIL