Owner's manual

5
English
Practice /
Usage
Start
IMPORTANT:
Make sure your floors and furnishings are
covered with drop cloths during usage.
Handle Button:
When the handle button is pressed and
released, the pump motor will switch on and


material, press and release the handle button
again.
Note:

partially pressed, the motor will start, but will

IMPORTANT: Do not submerge handle
into any liquids, and avoid getting any
spillage around the handle button.
Variable Speed Dial:
The settings on the variable speed dial



switched OFF.
V
a
r
i
a
b
l
e
S
p
e
e
d
0
9
1. If using the 9” roller, set the
variable speed dial to 9.
 
and release the handle button.
When paint starts to show
through the roller, press and
release the handle button to

2. If using the Smart Edge
Roller, set the variable speed

Tips:
  

  
start and stop the pump as
needed.
  
dial as needed to maintain



preparation and rolling
instructions.
 
switch is set to “PAINT” position.
9
1
2
9
1
2
4
2
3
PAINT
1
9”
3”