Owner's manual

7
English
Cleanup -
Purging the
Paint Hose
Start
Note:

these steps to return any remaining material

IMPORTANT: Make sure your floors and
furnishings are covered with drop cloths
during cleanup.
Before you begin cleaning:
When cleaning the Smart Power Roller, make
sure to use the appropriate cleaning solution

  
warm, soapy water to clean the Smart
Power Roller.
  
mineral spirits.
You will need:
  
cleaning solution.
1. Place roller arm into rest area.
Turn the variable speed dial to 9.
  
switch to “”.
 
switch back to “PAINT”.
2. Fully press and release the
handle button to switch the
motor on.
5. Remove spatter shield.
Press locking tab and drop roller
cover assembly into a bucket

solution.
 

into the paint can.
  
release the handle button to switch

Note: 
Roller assembly, open the guard

Drop the roller cover into a bucket

IMPORTANT: Do not attempt to
remove the core and cap of the
Smart Edge Roller cover.
1
4
2
5
3
2-3 MINUTES
9
1
2
PRESS
PAINT
PRESS