Owner's manual
9
English
Storage /
Maintenance
Start
You will need:
brush
Cleaning and Storage Tips:
components is the best way to ensure the
unit.
hose is stored in a large loop without any
IMPORTANT: Store the unit indoors with
the power cord wrapped safely around the
tower.
This unit contains no serviceable
electrical parts. Do not attempt to
service the unit yourself.
Maintenance
Reassembly
indicated below must be cleaned thoroughly and
ALL
other areas that connect with other parts. This can be
done by using the appropriate cleaning solution and an
old toothbrush.
Note:
paint residue that may have accumulated under it.
cleaned and lubricated, you can now reassemble the
1. Reassemble the cap and core into the roller cover.
the roller arm.
3. Attach the spatter shield to the roller arm.
attach the the roller assembly to the roller handle.
IMPORTANT: Do not submerge roller handle.
use, you must clean and lubricate the areas on the
lubricate the indicated areas.
Quick-
release
tabs
Quick-
release
tabs
Connecting
area
Connecting
area
Handle
Extension
O-ring
O-ring
Connecting
area
Seal
O-ring
Roller Arm
SMART Edge
Roller arm
Extension
Seal
Connecting area