Specifications

Seattle: [phone] Fax: [phone] Call Toll Free: [phone] 8-5 M-F 9-1 Sat.
Website: http://www.seamar.com email: [e-mail]
171
Engine & Steering Controls
Morse Mechanical Engine Controls
Ultraviolet stabilized high
density poyethylene outer
jacket.
Corrosion resistant
stainless steel rod.
Anti-Corrosive nickle
plated brass sleeve.
Corrosion resistant stain-
less steel hub.
Protective swivel seal.
Protective wiper seal.
Built in swivel compensates for arc movement
of shift and throttle levers.
Morse Controls pioneered the devel-
opment of high efficiency cables. Since
not all cables utilize this technology
there can be significant operating dif-
ferences between Morse cables and
other brands.
Shift and Throttle Control Cables
For outboards, sterndrives, inboards, jets, and auxiliary trans-
missions.
The control cable is a very important component in the
control system, It is the vital link between the control head
and the propulsion unit. Employing the best cable helps
ensure that your shift and throttle system operates smoothly
and efficiently. The design, technology, and materials used
in Morse cables have literally set the standard for the entire
marine industry. Morse Control cables are environmentally
tested for marine applications, they have stainless steel rods,
hubs, and end fittings as well as stainless or nylon covered
core wires with moisture resistant protective seals for added
corrosion protection and longer life. Their durable UV resis-
tant polyethylene outer jackets resist abrasion and withstand
the effects of salt water, chemicals, gasoline, and oil. Each
Morse cable is lifetime lubricated and sealed at the factory.