Owner`s manual

Turning ON the Meter %MC Readings Storing Readings
OPERATION
To turn ON the Meter, press the
STORE button for one second.
The Meter will turn OFF after 1 minute
of inactivity.
Inactivity means no change in
moisture readings or button presses.
The Meter takes continuous %MC
readings and puts them on the display.
When a reading is below 5%, the first
line shows the current species and
group field label. The second line
shows the current %MC reading and
group number. When a reading is
above 5%, the first line becomes a bar
graph representing the current %MC
reading.
When a valid reading is stored, the
second line will display a message
stating that it was stored as sample #
xxx. When attempting to store an
invalid reading, a message will state
the reading was too low and last
sample # xxx.
DISPLAY
WAGNER L610
V 1.00 R1.00
Douglas Fir Grp
.0 %MC 0
Storing MC # 14 or
MC too low # 13
STORE
To turn the Meter ON, press the
STORE button for one second.
Press the STORE button to store the
current MC reading into the current
group.
GROUP
MENU
ARROWS
500-61001-001 Rev. F Page 8 of 30