2 Jahre Garantie 2 years guarantee 2 ans de garantie 2 jaar garantie W 180 P D/GB/F/NL
1 # 0209058 2 # 0050342 3 4
6 5 7 8
9
W 180P GB Attention! When using power tools, the following basic safety measures are to be taken as protection against electric shock, personal injury and risk of fire: Read and observe these instructions before using the equipment. Safety Instructions for Spray Guns ● ● ● ● ● ● ● ● ● ● ● ● Spray materials emerge from nozzle tips under high pressure. Attention! Danger of injection - Never point the spray stream towards human beings or animals.
W 180P GB Materials to be used: Paints and varnishes containing solvents, acrylic enamel paints, water-soluble varnishes, glazes, polishes, wood preservatives, disinfectants, plant protectives, saturants, as well as oils and other watery liquids. The following spray substances are not suitable for use: Dispersion and latex paints, materials containing strong abrasives, glazes with coarse particles, strippers and caustic solutions, silicate paints.
W 180P GB Start-up 1. Before connecting to the mains supply, please be sure that the supply voltage is identical with the value given on the rating plate (on the side of the spray gun). 2. Dilute the spray material according to the above table. 3. Place the container on a sheet of paper and fill it with the prepared spray material. Attention! Do not operate the spray gun without spray material in the container; this can lead to increased wear of the pump! 4.
W 180P GB Cleaning and Maintenance The spray gun can only operate satisfactorily if it is cleaned and preserved after each use. Attention! Never immerse the spray gun in liquid when cleaning. 1 2. 3. 4. 5. 6. 7. Empty out the remaining paint from the container. Put proper thinner in the container and trigger the sprayer for approx. 2 seconds. Pull the main plug out of the socket. Disassemble the spray gun as shown in Illus. 9 (spare parts). Thoroughly clean all soiled parts.
W 180P GB Malfunction Cause Correction Spray gun buzzes and does not work Piston stuck Disassemble pump and clean with thinner Send spray gun to customer service center Insert valve Defective drive Spray gun does not suck in No valve in the pump Suction tube loose in the conical bore Venting hole in pump housing clogged Intake hole (fitting) in pump housing logged Viscosity of spray material too high Spray gun sucks in but does Nozzle clogged not spray Ducts and holes in atomiser clogged Spray gun
W 180P GB 2 years guarantee The guarantee runs for two years, counting from the date of sale (sales slip). It covers and is restricted to free-of-charge rectification of faults which are demonstrably attributable to the use of faulty materials in manufacture, or assembly errors; or free-of-charge replacement of the defective parts. The guarantee does not cover incorrect use or commissioning or fitting or repair work which is not stated in our operating instructions.
W 180P D CE Konformitätserklärung Wir erklären in alleiniger Verantwortung, dass dieses Produkt den folgenden einschlägigen Bestimmungen entspricht: 73/23/EWG, 89/336 EWG. Angewandte harmonisierte Normen: EN 50144-1: 1998, EN 50144-2-7: 2000, EN 55014-1: 2001, EN 55014-2: 2001, EN 61000-3-2: 2000, EN 61000-3-3: 2001 GB CE Declaration of Conformity We declare under sole responsibility that this product conforms to the following relevant stipulations: 73/23/EWG, 89/336 EWG.
W 180P D/A J. Wagner GmbH Otto-Lilienthal-Str. 18 D-88677 Markdorf Hotline: 0180/1 00 02 27 +49/75 44/505-0 +49/75 44/505-200 B Wagner Spraytech Belgie Veilinglaan 58 1861 Meise-Wolvertem +32/2/2 69 46 75 GB Wagner Spraytech (UK) Ltd. Haslemere Way, Tramway Industrial Estate Banbury, Oxon OX16 8TY +44/12 95/26 53 53 DK +32/2/2 69 78 45 Kornmarksvej 26 2605 Bro / ndby 53 CH +45/43 43 05 28 Wagner Spol s.r.o.
