UNIVERSAL SPRAYER W 575 FLEXIO OPERATING INSTRUCTIONS wagner-group.
W 575 Flexio a OVERVIEW 8 7 9 6 5 4 3 2 1 10 11 15 14 12 18 13 17 16 b A B
W 575 Flexio c a b click 1 I = ON 0 = OFF 2 1
W 575 Flexio A B 1 1 5-15 cm A B 20-30 cm C
W 575 Flexio 1 2 1 1 3 2 3 4 2
W 575 Flexio 1 2 2 1 2 1
W 575 Flexio 2 1 3 4 5 6 7
W 575 Flexio SPARE PARTS 1 2 3
W 575 Flexio AUS MANY THANKS FOR PLACING YOUR TRUST IN US We would like to congratulate you on purchasing this brand product from Wagner; we are sure that you will enjoy working with it greatly. Please read the Operating Manual carefully and observe the safety information before starting the device. Store the Operating Manual in a safe place close to the product in case it needs to be used by someone else. We would be happy to be of assistance if you have any questions, suggestions or requests.
W 575 Flexio AUS 1. Explanation of symbols used This symbol indicates a potential danger for you or for the device. Under this symbol you can find important information on how to avoid injuries and damage to the device. Danger of electrical shock i Indicates tips for use and other particularly useful information. Devices and accessories marked with this symbol are suitable for processing low-viscosity materials such as paints, glazes and wall paints specifically designed for this purpose.
W 575 Flexio AUS 2. Electrical Safety a) The connection plug of the power tool must fit in the socket. The plug may not be modified in any form. Verwenden Sie keine Adapterstecker gemeinsam mit schutzgeerdeten Elektrowerkzeugen. Unmodified plugs and suitable sockets reduce the risk of an electric shock. b) Avoid physical contact with earthed surfaces such as pipes, heating elements, stoves and refrigerators. The risk through electric shock increases if your body is earthed.
AUS W 575 Flexio e) Avoid an unnatural posture. Ensure that you are standing securely and have your balance at all times. This allows you can better control the power tool in unexpected situations. f) Wear suitable clothing. Do not wear wide clothing or jewellery. Keep your hair, clothes and gloves away from moving parts. Loose clothing, jewellery or long hair can be caught in moving parts.
W 575 Flexio AUS 5. Service a) Only have your power tool repaired by a qualified specialist and only use original spare parts. This ensures that the tool safety is maintained. b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s service agent or a similarly qualified person in order to avoid a safety hazard. 3. Safety Instructions for Spray Guns • Caution! Wear breathing equipment: Paint mist and solvent vapors are damaging to health.
W 575 Flexio AUS • Never open the device yourself in order to carry out repairs in the electrical system! • The units may only be used with a functional valve. If paints rises in the ventilating hose (Fig. 1, item 15) do not operate the unit further! Dismantle and clean the ventilating hose, valve and diaphragm and replace the diaphragm if necessary. Do not lay the spray gun. With original WAGNER accessories and spare parts, you have the guarantee that all safety regulations are fulfilled. • 4.
W 575 Flexio AUS 7. Coating Materials Not Suitable for Use Materials that contain highly abrasive components, plaster, facade paint, caustic solutions and acidic coating substances. Flammable materials. 8. Preparation of the workplace (for interior wall paint) Sockets and plugs must be masked. Risk of an electric shock as a consequence of sprayed material entering the socket! Mask all the areas and objects that are not to be spray painted, or remove them from the work area.
W 575 Flexio AUS 10. Start-up Before connecting to the mains supply, be sure that the supply voltage is identical with the value given on the rating plate. Unscrew the container from the spray gun. Aligning suction tube. (Fig. 2) If the suction tube is positioned correctly, the container contents can be sprayed without almost any residue. When working on lying objects: Turn the suction tube forwards. (Fig.
W 575 Flexio AUS 12. A djusting the Material Volume The volume of material can be set by turning the material volume control (Fig. 7, 1) in steps from 1 (minimum) to 12 (maximum). 13. Setting the Amount of Air (Fig. 8) Depending on the viscosity of the material to be sprayed and the finish of the object to be coated, it may be advisable to vary the amount of air. Very low viscosity materials, such as watery glazes do not have to be atomised with the maximum amount of air.
W 575 Flexio AUS i Important: Wipe off the nozzle and air cap regularly to make sure they do not get blocked. If taking a break during spraying, paint will dry over the nozzle. Simply scrape off any dry paint before commencing again. i "Cross spray" when using paint with a poor covering capacity or if the surface is highly absorbent (Fig. 10). • Interior wall paint in strong colour shades should be applied at least twice (allow first paint coat to dry first). This will ensure good coverage. 15.
W 575 Flexio AUS 9) Turn off the machine and remove the plug. 10) Divide the spray gun. Press the hook (Fig. 3 b "click") slightly downwards. Turn the gun front part and gun rear part against each other and take them apart. 17. C leaning the Wall Extra I-Spray spray attachment 1) Screw of the container and empty it. Pull out the suction tub with container seal. CAUTION! Never clean seals, diaphragm and nozzle or air holes of the spray gun with metal objects.
W 575 Flexio AUS 18. Maintenance Air filter WARNING! Never operate the machine without the air filter; dirt could be sucked in and interfere with the function of the machine. Check the air filter after each use for contaminants. Disconnect plug before changing parts. 1) Press both locks (Fig. 17, 1) and remove the filter cover. 2) Remove the air filter (2) and replace depending on contamination. 3) Click the filter cover in place again. Ventilating hose / Valve 1) Pull the ventilating hose (Fig.
W 575 Flexio AUS 20. Accessories Wagner's unique Click & Paint System means additional spray attachments can be purchased to suit a variety of different projects and surfaces. Further information about the range of suitable accessories can be found at www.wagneraustralia.com.au 21.
W 575 Flexio AUS Problem Coating material causes "paint tears" Cause • Too much coating material applied.
W 575 Flexio AUS Attention! The vibration emission value can differ from the specified value when the electric tool is actually in use, depending on how the electric tool is being used. It is necessary to specify safety measures to protect the operating personnel.
W 575 Flexio AUS 3+1 years guarantee The guarantee runs for three years, counting from the date of sale (sales slip). The guarantee is extended by a further 12 months if the device is registered online within 4 weeks of the purchase at www.wagner-group.com/3plus1. Registration is only possible if the buyer is in agreement with the data being stored that is entered during registration.
W 575 Flexio AUS 25
D J. WAGNER GMBH SK WAGNER FRANCE S.A.R.L. GB Otto-Lilienthal-Str. 18 88677 Markdorf T +49 0180 - 55 92 46 37 F +49 075 44 -5 05 11 69 F DK S E HR CZ WAGNER SPRAYTECH (UK) LTD RUS H ORKLA HOUSE CARE NORGE AS PL ROM ROMIB S.R.L. CH SF 12 Avenue des Tropiques Z.A.
