Originalbetriebsanleitung 2 Jahre Garantie 2 years Guarantee 2 ans de garantie 2 jaar garantie WallPerfect Flexio 995 D/GB/F/NL
WallPerfect Flexio 995 D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 31 GB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 - 62 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 - 94 NL . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WallPerfect Flexio 995 D GB General Translation of the original operating instructions MANY THANKS FOR PLACING YOUR TRUST IN US We would like to congratulate you on purchasing this brand product from Wagner; we are sure that you will enjoy working with it greatly. Please read the Operating Manual carefully and observe the safety information before starting the device. Store the Operating Manual in a safe place close to the product in case it needs to be used by someone else.
D GB 30. Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 31. Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 1. Explanation of symbols used This symbol indicates a potential danger for you or for the device.
General D GB WallPerfect Flexio 995 b) Never use the tool in hazardous areas that contain flammable liquids, gases or dusts. Power tools generate sparks that can ignite the dust or vapors. c) Keep children and other persons away when using the power tool. You can lose control of the tool if you are distracted. 2. Electrical Safety a) The tool plug must fit into the socket. The plug may not be modified in any form. Do not use adaptor plugs together with protective-earthed tools.
D GB d) Remove setting tools or wrenches before switching on the power tool. A tool or wrench that is in a rotating tool part can lead to injuries. e) Avoid an unnatural posture. Ensure that you are standing securely and have your balance at all times. This ensures that you can control the tool better in unexpected situations. f) Wear suitable clothing. Do not wear wide clothing or jewellery. Keep your hair, clothes and gloves away from moving parts.
WallPerfect Flexio 995 D GB General 5. Service a) Have your tool repaired only by qualified specialist personnel and only with original spare parts. This ensures that the tool safety is maintained. b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s service agent or a similarly qualified person in order to avoid a safety hazard. 3. Safety instructions for colour application devices • Caution! Wear breathing equipment: Paint mist and solvent vapors are damaging to health.
WallPerfect Flexio 995 • Do not lay the spray gun. With original WAGNER accessories and spare parts, you have the guarantee that all safety regulations are fulfilled. 4. Scope of delivery Scope of delivery (Fig. 1) 1 Basic device, Flexio 995 3 5 7 9 11 2 Spray lance (dismantled) comprising: Grab handle (a), air pipe (b) and spray head (c) Replacement nozzle seal for spray 4 Hose package comprising: Air hose (d), head (2 pcs., no fig.
WallPerfect Flexio 995 General D GB 5. Field of application With the Flexio 995, interior wall paints can be applied right from the bucket. And that is not all, for the Click&Paint adapter enables all Wagner spray attachments to be used for processing varnish paints and glazes. Depending on which material you want to use, you must affix either the spray lance or the spray attachment.
8. Preparation of the Coating Material Mix the material well in the original container. When using interior wall paint, an agitator is recommended. i i i WallPerfect Flexio 995 has been developed for use with all conventional paints in their undiluted form. If the surface is smooth and the paint you are using is very thick and gel-like, dilute it by 10%. Dilution can be necessary if the atomisation is coarse or if the flow rate is too low even at the maximum setting.
WallPerfect Flexio 995 D GB 10. Assembling the spray lance (fig. 2) Wall paint • Take the rolled-up pull wire (fig. 2, 1) out of the grab handle (2) and unwind it. • Put air pipe (3) in grab handle (2). 3 2 After assembly, the air pipe and grab handle can no longer be separated. Do not try to disassemble them by force! Put together the spray head (4) and air pipe (3). Remove the cover (5) from the spray head (4).
WallPerfect Flexio 995 • Insert the control hose (1) into the grab handle (2). • Insert the thin end of the black air hose • • • • • • (3) into the grab handle (2) (watch out for marking) and fix it into position by turning it to the right. Insert the thick end of the air hose (3) into the air-hose connection (4) on the basic device (watch out for marking) and fix it into position by turning it to the right.
WallPerfect Flexio 995 D GB 12. Multifunction switch settings (fig. 4, A) Wall paint FILL/ Settings for cleaning and CLEAN pre-filling the system OFF System is off ON Operating setting i Fill/ OFF CLEAN When using the spray attachment for varnish paints and glazes, the FILL/CLEAN functions may not be used! A B 13. Setting the flow rate when working with the spray lance (fig.
WallPerfect Flexio 995 i D GB In order to reduce overspray and to improve the sprayed result, the colour on the quantity scale (red or green) should match the colour of the width of the spray jet (red or green). • Put the machine down only on a level, clean surface. • Before connecting to the mains supply, be sure that the supply voltage is identical with the value given on the rating plate. Attention! Before switching on the device, check that the trigger is not pulled/held.
WallPerfect Flexio 995 D GB i Wall paint i i i The spray jet can pulsate when very liquid materials are being used. However, this does not usually have a negative effect on the results. If the work being performed is of a sophisticated nature (e.g. the borders around plugs) do not pull the trigger through completely. This prevents the feed pump from being switched on and the only material that is sprayed is the material that is already in the system.
WallPerfect Flexio 995 • • • • • • • • • container and pull the trigger to pump the remaining paint out of the system into the material container. Turn the machine off. (Set the multifunction switch to "OFF") Place a container with water in front of the device and attach the suction hose. Click the spray lance into the holder and slew it over the container with water. (Fig. 9) Attention! During automatic cleaning of the pump do not leave the device unattended.
WallPerfect Flexio 995 D GB • Loosen the pull wire by the adjustment Wall paint • • • • • screw (fig. 12, 1). Pull the trigger (fig. 12, 2) disengage the pull wire. Remove the spray head (fig. 12, 3) by pressing the lever (fig. 12, 4). Remove the adjustment ring (fig. 13, 1) carefully from the connecting nut (fig. 13, 2). Loosen the connecting nut. Remove the air cap (3), air screen (4), nozzle (5) and nozzle seal (6) from the spray head.
WallPerfect Flexio 995 • Push the nozzle seal (fig. 14, 6) over the • • • needle (8); the groove (slot) should point towards you. Insert the nozzle (fig. 14, 5), keeping an eye on the grooves. Put the air screen (4) in the air cap (3). Put both on the nozzle (5) and secure with the connecting nut (2). Snap the adjustment ring (fig. 15, 1) into the connecting nut enabling the loop on the peg to be positioned in the air cap.
WallPerfect Flexio 995 D GB 19.
WallPerfect Flexio 995 D GB Problem Cause Remedy Spray jet pulsates • Coating material in container running out • Nozzle seal worn • Air filter heavily soiled • Filter clogged at suction ➞➞Refill • Too much coating material ➞➞Turn the material volume setting to the left Spray excess material on the wall using the inking roller ➞➞Reduce the quantity of material and apply in several layers Coating material causes "paint tears" applied • Viscosity of coating material too low Too much fog of coatin
WallPerfect Flexio 995 D GB i The following chapters 20-26 describe working with vinyls and lacquers with the spray attachment. Read chapters 9-19 if you want to use wall paint with the Flexio 995. 20. Starting work with the spray attachment Varnish paints and glazes • Put the machine down only on a level, clean surface. • Before connecting to the mains supply, be • • • • • • sure that the supply voltage is identical with the value given on the rating plate. Plug in the power cable.
WallPerfect Flexio 995 D GB • Attach the Click&Paint adapter (Fig. 18, 2) with the bayonet coupling to the thinner end of the air hose (1). • Insert the other end of the adapter into the gun handle (3). • Set the multifunction switch (fig. 19, A) to "ON". Fill/ OFF 1 Varnish paints and glazes CLEAN 3 2 A 21. Setting the spray pattern you require when working with the spray attachment WARNING! Danger of injury! Never pull the trigger guard while adjusting the air cap.
WallPerfect Flexio 995 D GB 22. Setting the flow rate for the spray attachment (fig. 22). Set the material volume by turning the regulator on the trigger of the spray gun. lower material volume turn anti-clockwise (-) Varnish paints and glazes higher material volume turn clockwise (+) 23. Spraying technique when using the spray attachment i The spray result depends heavily on the smoothness and cleanliness of the surface to be sprayed.
WallPerfect Flexio 995 D GB 24. Interruption of Work • Turn the machine off. (Set the multifunction switch to "OFF") • Put the spray attachment on the floor. • When processing 2-component varnishes, clean the device immediately. • Clean nozzle openings after an interruption in operation. 25. Switching off and cleaning the spray attachment i The Clean function on the multifunction switch may not be used when cleaning the spray attachment. • Turn the machine off.
D GB WallPerfect Flexio 995 • Pull the ventilating hose (Fig. 26, 1) at the • • Varnish paints and glazes • top from the gun body. Screw off the valve cover (2). Remove the diaphragm (3). Clean all the parts carefully. Unscrew the union nut (Fig. 27, 1) and remove the air cap (2) and nozzle (3). Clean the air cap, nozzle seal (4) and nozzle with a brush and solvent or water. Clean the spray attachment and the exterior of the container with a cloth that has been soaked in water or a solvent.
WallPerfect Flexio 995 D GB • Place the container seal (Fig. 29, 1) from 3 1 2 Varnish paints and glazes • below on the suction tube (2) and slide it over the collar, while turning the container seal slightly. Insert the suction tube (Fig. 29, 2) with container seal in the gun body (3).
WallPerfect Flexio 995 D GB 26. Correction of Malfunctions Problem No coating material emerges from the nozzle Cause • Nozzle clogged • Material volume setting turned too far to the left • Suction tube clogged • Suction tube loose • No pressure build-up in container • Ventilating bore (Fig.
WallPerfect Flexio 995 • Spray material is too cold • • Remedy ➞➞The material you are spraying should be at room temperature Highly absorbent surface or paint ➞➞Cross spray (Fig. 11) with poor covering capacity Distance too large ➞➞Closer to the object 27. Maintenance Check the air filter (fig. 30, 1) after use and replace depending on how soiled it is. Insert a new air filter (order no. 2310 812) and replace the lid (2).
WallPerfect Flexio 995 General D GB 29. Spare Parts i The pictures of spare parts can be found on the page that folds out at the end of the operating manual. Spare Parts List: Spray lance (Fig. A1) Pos. 1,2 3,4,5,6 6 1-7 8 9 9,10 Designation Spray jet adjustment ring, union nut * Nozzle set * Nozzle seal (2 pcs.) Complete spray head * Spray head cover O-ring Spray lance * Order No. 2310 811 2310 810 2304 433 2344 435 2308 176 2308 158 2344 436 Spare Parts List: Perfect Spray spray attachment (Fig.
WallPerfect Flexio 995 D GB Stirring rod Lubricating grease General Spare Parts List: Flexio 995 (Fig. A3) 9 2304 419 2315 539 * Denotes parts that can only be purchased together and not individually. 30. Accessories The CLICK&PAINT SYSTEM with additional spray attachments and accessories offers the right tool for each work. Accessories (not included in the delivery) Name Brilliant spray attachment incl.
WallPerfect Flexio 995 General D GB 31. Technical Data Max. viscosity: Interior wall paint Power source: Power consumption: Atomizing output: Max.
WallPerfect Flexio 995 Important Note regarding Product Liability! According to an EU directive, the manufacturer is only liable without limitation for faults in the product if all parts come from the manufacturer or have been approved by the manufacturer and have been mounted to the device and are operated properly.
WallPerfect Flexio 995 D P CE Konformitätserklärung Wir erklären in alleiniger Verantwortung, dass dieses Produkt den folgenden einschlägigen Bestimmungen entspricht: 2006/42/EG; 2004/108/EG; 2011/65/EG; 2002/96/EG Angewandte harmonisierte Normen: EN 60335-1:2012; EN 50580:2012; EN 55014-1:2006 + A1:2009 + A2:2011; EN 55014-2:1997 + Corrigendum 1997 + A1:2001 + A2:2008; EN 61000-3-2:2006 + A1:2009 + A2:2009; EN 61000-3-3:2008; EN 62233:2008 GB P CE Declaration of Conformity We declare under sole respons
WallPerfect Flexio 995 ÜBERSICHT / OVERVIEW / APERÇU GÉNÉRAL / OVERZICHT A1 1 3 2 4 5 6 7 9 8 10 A2 4 3 2 1 A3 2 1 3 5 4 6 7 5 8 6 9 7 8 9
WallPerfect Flexio 995 D GB F NL Auf der Rückseite dieser Ausklappseite befinden sich die Ersatzteilbilder. Die dazugehörigen Ersatzteillisten finden Sie in Kapitel 29. The pictures of spare parts can be found on the back of this fold-out page. The related spare part lists can be found in chapter 29. Les illustrations des pièces de rechange se trouvent au dos de cette page dépliante. Vous trouverez les listes de pièces de rechange correspondantes au chapitre 29.
WallPerfect Flexio 995 D J. Wagner GmbH Otto-Lilienthal-Str. 18 D-88677 Markdorf Hotline 0180 5 59 24 637 +49/ (0) 75 44/ 505-1169 B Wagner Spraytech Belgie Veilinglaan 56-58 1861 Meise-Wolvertem +32/2/2 69 46 75 +32/2/2 69 78 45 F Wagner France S.a.r.l. 12 Avenue des Tropiques Z.A. de Courtaboeuf 91978 Les Ulis Cedex 0 825 011 111 DK/S +33 (0) 1 69 81 72 57 Wagner Spraytech Scandinavia A/S Helgeshøj Allé 28 DK-2630 Tåstrup +45/43 27 18 18 +45/43 43 05 28 CH J.
