Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Commissioning
Product manual | Version: 2.1.0 101
8PORT IOL-B FLD PN DC 24V 2.0A
Table 63: WAGO IO-Link Configurator – User Roles
User Role Description
Specialist The user sees the “Specialist” selection of parameters.
Write access is usually unrestricted. This is specified in
the device description by the device manufacturer and
may differ for different devices.
The specialist can change passwords and their validity
periods for all user roles.
The pre-set password is “special.”
“Manage User Roles” Dialog
This dialog is only available for the “Specialist” user role. Here you can assign passwords
for the user roles and set the behavior when the tool is invoked.
A password validity period can be entered to avoid having to constantly reenter the pass-
word during commissioning, for example. For the duration of the password validity period,
you are no longer prompted to enter the password after the first successful login. This is
especially helpful for operation via TCI. The start screen can also be suppressed.
Figure31: “Permissions” Dialog
Suppressing the start screen:
• The start screen no longer appears upon startup. However, it can be accessed via
“Help/About.”
Suppressing the login and password prompt:
• This function switches the login and passwords off for all user roles.
Password validity (min):
• This function is only available if “Login and Password Prompt” is not suppressed. After
successful login to a user role, the product starts the selected time without a login dia-
log. If the user wants to switch roles, this can be done with the toolbar or menu. This
requires entering the corresponding password.
10.2.3.3.6.4 Importing an IODD Device Description
Device descriptions can be imported into WAGO IO-Link Configurator from any storage
location. The device descriptions must be checked by a valid checker and tagged. When
imported, the validity of the IODD XML files is checked on the basis of the “stamp” tag. All
referenced graphics files must also be present. The files are only imported if they are
complete and correct.
WAGO IO-Link Configurator supports:
• IODD V1.0.1 for IO-Link devices per V1.0 and