Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Commissioning
Product manual | Version: 2.1.0 111
8PORT IOL-B FLD PN DC 24V 2.0A
• Connected Status
A connection exists between WAGO IO-Link Configurator and the WAGO IO-Link mas-
ter
• PLC Connection Status
Indicates whether or not a PLC is connected to the master; if a PLC is connected, it
has access rights for configuration and for writing process output data; otherwise, the
tool has full access.
• Flashing
Requests flashing for finding the master; this is not available for all masters.
• Search Masters
Searches for masters of the type being configured
The IP address can also optionally be entered manually. Right-clicking on the IP ad-
dress field or clicking on the button next to it opens a dialog for entering the IP ad-
dress. Recently used addresses are offered.
• Online/Offline
Establishes or terminates the connection
• Upload of Data Storage Data from Master
Loads the content of the data storage from the master into the project
• Download of Data Storage Data into Master
Loads the data storage data that was saved previously from the project into the master
• Status of Data Storage Data in Project
The tooltip indicates whether data storage data is stored in the project
• Search Devices
Searches for connected devices; if devices are specified as unknown here, the associ-
ated IODD device description is missing. Please load it into the project nonetheless.
Right-clicking on the corresponding device offers the IODD import. Here you can im-
port the IODD from the local environment or IODDfinder.
With modular IO-link masters, the configuration can be read in online.
Right-clicking in the “Module” column or, if no modules have been configured yet, in an
empty space opens the “Configure Station” selection.