Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Commissioning
Product manual | Version: 2.1.0 127
8PORT IOL-B FLD PN DC 24V 2.0A
The following table lists port-specific diagnostic information.
Table 72: Port-Specific Diagnostics
Node Name Node Class Access Description
DiagnosticsPin1, Diagnos-
ticsPin2, DiagnosticsPin4
Variable Read Diagnostics on pin 1, pin 2
or pin 4; the numerical
value contains bit-coded
information:
Bit 0: short circuit
Bit 1: overload protection
Bit 2: overtemperature pro-
tection
Bit 3: overvoltage protec-
tion
Bit 4: overcurrent
Bit 5: undercurrent
Bit 6: overtemperature
Bit 7: undertemperature
Bit 8: overvoltage
Bit 9: undervoltage
Bit 10: watchdog
0: diagnostics inactive
1: diagnostics active
10.2.5.1.6 Reading out Statistics
The OPC UA server provides nodes with statistical information. For example, the OPC
UA client can read out the maximum measured current on pin 1 of a port in the MaxCur-
rentPin1 node. The path to this node is:
Root > Object > DeviceSet > [device-name] > IOLinkMaster > PortXX
> Statistics > Current / Temperature / Voltage
The following table lists port-specific statistical information:
Table 73: Port Specific Statistical Information
Node Name Node Class Access Description
MaxCurrentPin1,
MaxCurrentPin2,
MaxCurrentPin4
Variable Read Maximum current on pin1,
pin2 or pin4 since the
value was reset; unit: mA
MinCurrentPin1,
MinCurrentPin2,
MinCurrentPin4
Variable Read Minimum current on pin1,
pin2 or pin4 since the
value was reset; unit: mA
MaxTemperaturePin1,
MaxTemperaturePin2,
MaxTemperaturePin4
Variable Read Maximum temperature on
pin1, pin2 or pin4 since
the value was reset; unit:
°C
MinTemperaturePin1,
MinTemperaturePin2,
MinTemperaturePin4
Variable Read Minimum temperature on
pin1, pin2 or pin4 since
the value was reset; unit:
°C
MaxVoltagePin1,
MaxVoltagePin2,
MaxVoltagePin4
Variable Read Maximum voltage on pin1,
pin2 or pin4 since the
value was reset; unit: mV