Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Diagnostics
Product manual | Version: 2.1.0 131
8PORT IOL-B FLD PN DC 24V 2.0A
Table 81: LED States – ETHERNET Status
LED State Description
Flickering (load-dependent) The indicator switches on and off at a frequency of 10
Hz, indicating high ETHERNET activity: on for 50 ms
and then off for 50 ms. The indicator switches on and
off at irregularity intervals to indicate low ETHERNET
activity.
Bluetooth Status
The Bluetooth
®
LED is integrated into the Bluetooth
®
antenna and indicates the connec-
tion status.
Table 82: Bluetooth® LED States
LED Color State Description
BT Duo LED, blue/red
Blue On Bluetooth
®
connection es-
tablished
Off Off Bluetooth
®
inactive
IO-Link Port Status
LEDs 0 (port X01), 2 (port X02), 4 (port X03), ..., 14 (port X08) indicate the status of the
IO-Link master or digital input/output module.
Table 83: IO-Link Port Status (Class B)
LED Color State Description
0, 2, 4, ...
IO-Link port
(pin4)
Duo LED, yellow/red/green (yellow = simultaneously red and green)
Yellow On Status of digital input/out-
put: 1
Off Off Status of digital input/out-
put: 0
Green On IO-Link communication ac-
tive
Green Flashing 1Hz No IO-Link communication
or incorrect IO-Link device
Red On Overload, short circuit (pin
4 and pin 3)
Red Flashing 1Hz Overload, sensor supply
short circuit (pin1 and
pin3)
1, 3, 5, ... Duo LED, yellow/red (yellow = simultaneously red and green)
Off Off LED without function
11.2 Diagnostics via PROFINET
General Alarms
Table 84: General Alarms
Number
(hex)
Alarm Description Corrective Action
0x0100 Undervoltage, 1L Undervoltage in supply cable 1L
The supply cable has fallen below the limit-
ing value for the minimum voltage
Check supply voltage