Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Properties
Product manual | Version: 2.1.0 15
8PORT IOL-B FLD PN DC 24V 2.0A
Table 2: Legend for “View” Figure
Function Position Custom Name Description
ETHERNET 2 X21 ETHERNET interface, M12, D-coded, PROFINET port1
1 LNK (X21) Link LED for port X21
3 ACT (X21) Activity LED for port X21
21 X22 ETHERNET interface, M12, D-coded, PROFINET port2
22 LNK (X22) Link LED for port X22
20 ACT (X22) Activity LED for port X22
Bluetooth
®
4 BT Bluetooth
®
antenna, including Bluetooth
®
LED
Indicators 19 SYS System LED
18 FLD Field LED
17 APL Application LED
16 BF PROFINET bus error LED
15 SF PROFINET system error LED
Identification 5 - Data Matrix Code (DM Code)
Contains the serial number of the module (UII)
Power supply 6 X31 Power supply input (Power In)
13 X32 Power supply output (Power Out)
14 1L (X32) 1L power supply LED (24VDC)
12 2L (X32) 2L power supply LED (24VDC)
IO-Link class B 10 X01...X08 IO-Link port, ports X01to X08, M12, A-coded
9 1, 3, 5, 7. 9, 11,
13, 15
LEDs with no function
11 0, 2, 4, 6, 8, 10,
12, 14
IO-Link port LEDs for ports X01...X08 (pin4)
Marking 8 - Port marking (WMB Inline and marking strips)
23 - Module marking (WMB Inline)
Installation 7 - Mounting hole for front or side mounting
24 - Mounting hole for front or side mounting
4.2 Connections
4.2.1 Power supply
The product is powered through the X31 connection (Power in). Two supply cables can
be connected to the plug:
• Supply cable 1: 1L+ (U
1L
) and reference potential 1L−
• Supply cable 2: 2L+ (U
2L
) and reference potential 2L−
The two supply cables are electrically isolated.
Each pin of plug X31 (Power in) is connected to the same pin of socket X32 (Power out)
and serves to pass the power on to the next device.